The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. Jacketed bullets must have a crimp groove.
Más...
El Taper Crimp Die de Lee es de acero endurecido diseñado para superar los problemas de crimpado causados por un diseño de matriz deficiente. Las balas con camisa deben tener una ranura para el crimpado.
Más...
Evaluaciones de clientes para LEE PRECISION LEE TAPER CRIMP DIE, 38 SPECIAL
Número de evaluaciones: 1
De brownells.com: 1
Evaluación media: 5
Works well at about half the price(11/04/2014)
The only thing I'm not terribly happy with is the O ring adjustment lock. I think it's about 90% as good as the RCBS adjustment lock rings that you lock with an Allen wrench and they STAY locked, however, if I really want, I can order inexpensive RCBS lock rings and use them on my Lee dies. Besides, I didn't have enough crimp on my .45 ACP lead semi-wadcutters, and when I inserted a loaded round into the die and added crimp to where I thought it should be, and tried to tighten the Lee lock ring with a crescent wrench without holding the die with another crescent wrench, the die turned in the 3 die turret until it stopped tightly up against the cartridge case. I looked at the taper crimp on the cartridge in the die, and found it to be perfect. I loaded the rest of my empty cases and found that the press handle "broke over" a little near the end of the stroke assuring as tight a crimp as possible. I have found no problems with this method after loading and firing 5 rounds, and the rest of my reloaded .45's look great!
N.º de producto: 100053274 LEE PRECISION LEE TAPER CRIMP DIE, 38 SPECIAL Ref Fabricante: 90781734307907815 El Taper Crimp Die de Lee es de acero endurecido diseñado para superar los problemas de crimpado causados por un diseño de matriz deficiente. Las balas con camisa deben tener una ranura para el crimpado.
21.9EUR221,90 €
*
Plazo de entrega de aproximadamente 14-21 días. 2 pcs. en el almacén de EE.UU.
Caracteristicas:Cartucho: 357 Magnum, 38 Special, 357 MaximumTipo de die: Taper Crimp Dies
Cartucho:
38 Special,357 Magnum,357 Maximum
Tipo de die:
Taper Crimp Dies
Peso de entrega: 0,136kgAltura de envío: 42mmAncho de envío: 30mmLongitud de envío: 114mm
Detalles del artículo
Hecho en USA
N.º de producto: 100053275 LEE PRECISION LEE TAPER CRIMP DIE, 40 S&W/ 10MM Ref Fabricante: 90782734307907822 El Taper Crimp Die de Lee es de acero endurecido diseñado para superar los problemas de crimpado causados por un diseño de matriz deficiente. Las balas con camisa deben tener una ranura para el crimpado.
21.9EUR821,90 €
*
Plazo de entrega de aproximadamente 14-21 días. 8 pcs. en el almacén de EE.UU.
Caracteristicas:Cartucho: 10 mm Auto, 40 S&WTipo de die: Taper Crimp Dies
N.º de producto: 100053279 LEE PRECISION LEE TAPER CRIMP DIE, 9MM Ref Fabricante: 90780734307907808 El Taper Crimp Die de Lee es de acero endurecido diseñado para superar los problemas de crimpado causados por un diseño de matriz deficiente. Las balas con camisa deben tener una ranura para el crimpado.
19.9EUR1419,90 €
*
Plazo de entrega de aproximadamente 14-21 días. Más de 10 pcs. en almacén de EE.UU.
Caracteristicas:Cartucho: 9 mm LugerTipo de die: Taper Crimp Dies
N.º de producto: 100053278 LEE PRECISION LEE TAPER CRIMP DIE, 45 ACP Ref Fabricante: 90785734307907853 El Taper Crimp Die de Lee es de acero endurecido diseñado para superar los problemas de crimpado causados por un diseño de matriz deficiente. Las balas con camisa deben tener una ranura para el crimpado.
21.9EUR621,90 €
*
Plazo de entrega de aproximadamente 14-21 días. 6 pcs. en el almacén de EE.UU.
Caracteristicas:Cartucho: 45 Auto (ACP)Tipo de die: Taper Crimp Dies
The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. Jacketed bullets must have a crimp groove.
Más...
El Taper Crimp Die de Lee es de acero endurecido diseñado para superar los problemas de crimpado causados por un diseño de matriz deficiente. Las balas con camisa deben tener una ranura para el crimpado.
Más...
Evaluaciones de clientes para LEE PRECISION LEE TAPER CRIMP DIE, 38 SPECIAL
Número de evaluaciones: 1
De brownells.com: 1
Evaluación media: 5
Works well at about half the price(11/04/2014)
The only thing I'm not terribly happy with is the O ring adjustment lock. I think it's about 90% as good as the RCBS adjustment lock rings that you lock with an Allen wrench and they STAY locked, however, if I really want, I can order inexpensive RCBS lock rings and use them on my Lee dies. Besides, I didn't have enough crimp on my .45 ACP lead semi-wadcutters, and when I inserted a loaded round into the die and added crimp to where I thought it should be, and tried to tighten the Lee lock ring with a crescent wrench without holding the die with another crescent wrench, the die turned in the 3 die turret until it stopped tightly up against the cartridge case. I looked at the taper crimp on the cartridge in the die, and found it to be perfect. I loaded the rest of my empty cases and found that the press handle "broke over" a little near the end of the stroke assuring as tight a crimp as possible. I have found no problems with this method after loading and firing 5 rounds, and the rest of my reloaded .45's look great!
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.