Fully-machined hardened steel mount with three-point mounting, provides a stable, secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy, forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope.
Montura de acero endurecido completamente mecanizada con montaje de tres puntos, proporciona una base estable y segura para montar visores de gran objetivo. Se sujeta fácilmente a la cola de milano de la guía de carga y al enganche de montaje del receptor sin modificaciones al rifle. Un pesado tornillo de bloqueo frontal proporciona una estabilidad sólida como roca en el anillo del receptor. El canal de visión permite el uso de miras de hierro de respaldo sin necesidad de retirar el visor.
ESPECIFICACIONES: Acero 4140, acabado negro, nitrurado. Endurecido a Rc 60-62. 5.38" (13.6cm) de largo. 1.875" (4.7cm) de alto. Pesa 10.9 oz (310 g).
Más...
Evaluaciones de clientes para SMITH ENTERPRISE M14 SCOPE MOUNT
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 3,3
Should have bought a Sadlak.(14/11/2010)
I've been trying to get this mount to work for over 3 yrs. Shoots 20" high with MK IV scope adjusted to full down limit (that's 45 minutes down from mechanical center). Tried different rings (Smith, Burris Signature), adding shims between rings and mount, raising front of mount with forward setscrew. Shoots groups under 1" @ 100yds when installed per instructions with Smith rings, but 20" high. Shot like a shotgun (6" groups) with other attempts to lower point of impact. Mount manufacturer said SA, NM, M1A not manufactured to tolerance. It groups under an inch! Should have bought a Sadlak.
One of the Best Mounts for M1A/M14(16/12/2010)
This is a good Mount. A little more difficult to install than a regular mount like bolt guns but this is due to the nature of the M14. Sadlak and Smith Enterprise are very much alike if not exactly. The Mounts are manufactured to G.I. receiver specs. I have installed these on many M14's in Iraq. But some Springfield's Receivers are not to G.I. specs. You can send the rifle to Smith Enterprise or another competent gunsmith who is good with these style of rifles. I would recommend this mount wholeheartedly. I've never had problems with it that could not be overcame.
Rock Solid(09/08/2012)
Great mount, not the easiest to install but well worth the time and money. Before trying to put it on - Read the instructions!
N.º de producto: 851000001 SMITH ENTERPRISE M14 SCOPE MOUNT Ref Fabricante: 2006 Montura de acero endurecido completamente mecanizada con montaje de tres puntos, proporciona una base estable y segura para montar visores de gran objetivo. Se sujeta fácilmente a la cola de milano de la guía de carga y al enganche de montaje del receptor sin modificaciones al rifle. Un pesado tornillo de bloqueo frontal proporciona una estabilidad sólida como roca en el anillo del receptor. El canal de visión permite el uso de miras de hierro de respaldo sin necesidad de retirar el visor.
539.9EUR6539,90 €
*
Plazo de entrega de aproximadamente 14-21 días. 6 pcs. en el almacén de EE.UU.
Color:
Black
Estilo:
Tactical Bases
Hacer:
Springfield
Material:
Steel
Modelo:
M14,M1A
Numero de bases:
1-Piece
Peso de entrega: 0,363kgAltura de envío: 41mmAncho de envío: 91mmLongitud de envío: 165mm
Fully-machined hardened steel mount with three-point mounting, provides a stable, secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy, forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope.
Montura de acero endurecido completamente mecanizada con montaje de tres puntos, proporciona una base estable y segura para montar visores de gran objetivo. Se sujeta fácilmente a la cola de milano de la guía de carga y al enganche de montaje del receptor sin modificaciones al rifle. Un pesado tornillo de bloqueo frontal proporciona una estabilidad sólida como roca en el anillo del receptor. El canal de visión permite el uso de miras de hierro de respaldo sin necesidad de retirar el visor.
ESPECIFICACIONES: Acero 4140, acabado negro, nitrurado. Endurecido a Rc 60-62. 5.38" (13.6cm) de largo. 1.875" (4.7cm) de alto. Pesa 10.9 oz (310 g).
Más...
Evaluaciones de clientes para SMITH ENTERPRISE M14 SCOPE MOUNT
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 3,3
Should have bought a Sadlak.(14/11/2010)
I've been trying to get this mount to work for over 3 yrs. Shoots 20" high with MK IV scope adjusted to full down limit (that's 45 minutes down from mechanical center). Tried different rings (Smith, Burris Signature), adding shims between rings and mount, raising front of mount with forward setscrew. Shoots groups under 1" @ 100yds when installed per instructions with Smith rings, but 20" high. Shot like a shotgun (6" groups) with other attempts to lower point of impact. Mount manufacturer said SA, NM, M1A not manufactured to tolerance. It groups under an inch! Should have bought a Sadlak.
One of the Best Mounts for M1A/M14(16/12/2010)
This is a good Mount. A little more difficult to install than a regular mount like bolt guns but this is due to the nature of the M14. Sadlak and Smith Enterprise are very much alike if not exactly. The Mounts are manufactured to G.I. receiver specs. I have installed these on many M14's in Iraq. But some Springfield's Receivers are not to G.I. specs. You can send the rifle to Smith Enterprise or another competent gunsmith who is good with these style of rifles. I would recommend this mount wholeheartedly. I've never had problems with it that could not be overcame.
Rock Solid(09/08/2012)
Great mount, not the easiest to install but well worth the time and money. Before trying to put it on - Read the instructions!
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.