OPF-M17, ACRO, RSD is precision machined from 4140 steel, and QPQ coated. Aimpoint ACRO P1/P2 requires the plates to adhere to Aimpoint ACRO TDP with tight tolerances, OPF-M17, ACRO, RSD has proven to be the best choice among professional users. OPF-M17, ACRO, RSD is compatible with MIL issued M17/M18. It is a drop in adapter for superb Aimpoint ACRO sights. It is identical to the Tangodown SSM-03. OPF-M17, ACRO, RSD is compatible with P320 X-Five Legion, Legion Carry, and DP Cut. It is not compatible with P320 Pro Cut, P320 sub compact, AXG, and RX. OPF-M17-ACRO, RSD is shipped with two M4 0.7mm x 6mm (torque value: 20 to 25 in·lb), a T20 key, and a packet of VC-3. Proudly designed and made in the USA. ATTENTION: Steiner MPS users: MPS's recoil lug underneath the sight may vary in width and be slightly wider than that of the ACRO. Should this be the case, firmly push the MPS on the plate, or gently tap on the sight until the MPS fully seats. For the new M17/M18 and SIG P320 with the Delta Point Pro cut, Forward Controls Design is proud to offer OPF-M17, ACRO, RSD (rear sight dovetail).
¡Mejora tu puntería con el OPF-M17, ACRO, RSD!
El OPF-M17, ACRO, RSD es una placa de montaje óptico de alta precisión, fabricada en acero 4140 y recubierta con QPQ. Diseñada para cumplir con las estrictas tolerancias del TDP de Aimpoint ACRO, esta placa es la mejor opción para usuarios profesionales.
Características principales:
- Compatible con los modelos militares M17/M18.
- Adaptador de inserción para miras Aimpoint ACRO excepcionales.
- Identica a la Tangodown SSM-03.
- Compatible con P320 X-Five Legion, Legion Carry y DP Cut.
- No es compatible con P320 Pro Cut, P320 sub compact, AXG y RX.
El OPF-M17, ACRO, RSD se envía con:
- Dos tornillos M4 0.7mm x 6mm (valor de par: 20 a 25 in·lb).
- Una llave T20.
- Un paquete de VC-3.
Diseñado y fabricado orgullosamente en EE. UU.
Atención a los usuarios de Steiner MPS:
El saliente de retroceso del MPS debajo de la mira puede variar en ancho y ser ligeramente más ancho que el del ACRO. Si es el caso, empuja firmemente el MPS sobre la placa o golpea suavemente la mira hasta que el MPS se asiente completamente.
Para los nuevos M17/M18 y SIG P320 con corte Delta Point Pro, Forward Controls Design se enorgullece de ofrecer el OPF-M17, ACRO, RSD (dovetail de mira trasera).