Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately. Fitting chart for Standard Peep Sights Find the correct mounting screw set for your model here.
SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Late rifles with safety at trigger will require drilling and tapping. Mounting screw sets sold separately.
Más...
Añade un toque de autenticidad a los rifles de acción de bomba y palanca, ya sea que se utilicen para la caza o para el Tiro de Acción de Vaqueros. Proporciona una mejor definición de la mira y una adquisición de objetivo más rápida en el campo o en el polígono. Ubica la apertura más cerca del ojo para una imagen clara del objetivo; un radio de mira más largo aumenta la precisión. Construcción completamente de acero con ajustes micrométricos para el viento y la elevación. Se pliega hacia atrás para almacenamiento. El juego de tornillos de montaje debe adquirirse por separado. Encuentra la tabla de ajuste para las Mira Peep Estándar y el juego de tornillos de montaje correcto para tu modelo aquí.
ESPECIFICACIONES: Acero, azulado. Las armas más antiguas pueden requerir perforación y roscado. Incluye (2) aperturas de ½" de diámetro: una con orificio de .055" (1.4mm) y otra de .102" (2.6mm), y (1) apertura de ¾" de diámetro con orificio de .032" (.81mm). Savage 99 no se ajustará a los rifles tardíos con seguro en la parte superior. Los rifles tardíos con el seguro en el gatillo requerirán perforación y roscado. Los juegos de tornillos de montaje se venden por separado.
Más...
Evaluaciones de clientes para MARBLE ARMS ROSSI 92 TANG SIGHT REAR SIGHT BLACK
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 3,7
9807 for Rossi(21/12/2010)
The good: very nicely made and finished. The base mates well with the tang. The bad: there were no instructions. I called Marble and they quickly emailed them. They were very good and should have been included in the box. If they are not included with your sight, don't mess with it. Call immediately and get a copy before you ever take the sight out of the box. The ugly: one of the apertures only had 1 thread so it would not go onto the post and the sight also had a small amount of front/rear play. I returned the sight and aperture to Marble and I'm waiting their return. My final assessment is pending.
Repair was satisfactory.(03/01/2011)
Marble did an excellent job of repairing it. A new aperture was installed and it fit correctly. All the play in the post was removed and is now very tight. Turn around time was very good â13 calendar days from the day I mailed it to its return. The original defects were disappointing, but the repair was very satisfactory. Installation will be next.
Great product(11/12/2014)
Just received this sight and installed it on my wife's Rossi M92.
Simple installation drilled and tapped 10-32 on the tang. Everything fit perfect. Sight is fast and much better than the original buckhorn. I have a milling machine so aligning the tang for drilling and tapping was a piece of cake, a drill press and vise would also do the job. Remember to order the bolt kit.
N.º de producto: 579009807 MARBLE ARMS ROSSI 92 TANG SIGHT REAR SIGHT BLACK Ref Fabricante: 009807871373003079 Añade un toque de autenticidad a los rifles de acción de bomba y palanca, ya sea que se utilicen para la caza o para el Tiro de Acción de Vaqueros. Proporciona una mejor definición de la mira y una adquisición de objetivo más rápida en el campo o en el polígono. Ubica la apertura más cerca del ojo para una imagen clara del objetivo; un radio de mira más largo aumenta la precisión. Construcción completamente de acero con ajustes micrométricos para el viento y la elevación. Se pliega hacia atrás para almacenamiento. El juego de tornillos de montaje debe adquirirse por separado. Encuentra la tabla de ajuste para las Mira Peep Estándar y el juego de tornillos de montaje correcto para tu modelo aquí.
179.9EUR0179,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately. Fitting chart for Standard Peep Sights Find the correct mounting screw set for your model here.
SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Late rifles with safety at trigger will require drilling and tapping. Mounting screw sets sold separately.
Más...
Añade un toque de autenticidad a los rifles de acción de bomba y palanca, ya sea que se utilicen para la caza o para el Tiro de Acción de Vaqueros. Proporciona una mejor definición de la mira y una adquisición de objetivo más rápida en el campo o en el polígono. Ubica la apertura más cerca del ojo para una imagen clara del objetivo; un radio de mira más largo aumenta la precisión. Construcción completamente de acero con ajustes micrométricos para el viento y la elevación. Se pliega hacia atrás para almacenamiento. El juego de tornillos de montaje debe adquirirse por separado. Encuentra la tabla de ajuste para las Mira Peep Estándar y el juego de tornillos de montaje correcto para tu modelo aquí.
ESPECIFICACIONES: Acero, azulado. Las armas más antiguas pueden requerir perforación y roscado. Incluye (2) aperturas de ½" de diámetro: una con orificio de .055" (1.4mm) y otra de .102" (2.6mm), y (1) apertura de ¾" de diámetro con orificio de .032" (.81mm). Savage 99 no se ajustará a los rifles tardíos con seguro en la parte superior. Los rifles tardíos con el seguro en el gatillo requerirán perforación y roscado. Los juegos de tornillos de montaje se venden por separado.
Más...
Evaluaciones de clientes para MARBLE ARMS ROSSI 92 TANG SIGHT REAR SIGHT BLACK
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 3,7
9807 for Rossi(21/12/2010)
The good: very nicely made and finished. The base mates well with the tang. The bad: there were no instructions. I called Marble and they quickly emailed them. They were very good and should have been included in the box. If they are not included with your sight, don't mess with it. Call immediately and get a copy before you ever take the sight out of the box. The ugly: one of the apertures only had 1 thread so it would not go onto the post and the sight also had a small amount of front/rear play. I returned the sight and aperture to Marble and I'm waiting their return. My final assessment is pending.
Repair was satisfactory.(03/01/2011)
Marble did an excellent job of repairing it. A new aperture was installed and it fit correctly. All the play in the post was removed and is now very tight. Turn around time was very good â13 calendar days from the day I mailed it to its return. The original defects were disappointing, but the repair was very satisfactory. Installation will be next.
Great product(11/12/2014)
Just received this sight and installed it on my wife's Rossi M92.
Simple installation drilled and tapped 10-32 on the tang. Everything fit perfect. Sight is fast and much better than the original buckhorn. I have a milling machine so aligning the tang for drilling and tapping was a piece of cake, a drill press and vise would also do the job. Remember to order the bolt kit.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.