Brownells Shotgun Sight Kit “B” is the most important improvement in the replacement shotgun sight field since the introduc-tion of the original Brownells Shotgun Sight Kit nearly 20 years ago. The new Kit is truly the natural and logical companion to the original Kit “A” - giving you, the gunsmithing or sports shop, all the sights that Kit “A” doesn’t contain, but that you need to have a really versatile and complete replacement shotgun sight inventory in just 2 small boxes. Plus, in Kit “B”, we took the practical step of making the White beads out of stainless steel. Stainless is stronger, won’t crush or distort when the beads are installed, does not have to be removed when the gun goes into the hot bluing solution (and won’t dissolve and ruin your bluing bath once it’s in there)!! Plus, the stainless won’t break off at the top of the shank, stays shiny forever, stands up to tougher use in the field, and generally is one whale of a lot better sight.But, the real advantage of Kit “B” is that by combining it with Kit “A”, you can now have a selection of shank sizes unequaled among shotgun sights. So, if you get a gun in your shop with a badly misshapen, worn or stripped-out sight hole, you will have a bead of exactly the same size, but with a shank one size larger. Replacement is then just a simple matter of drilling out the hole to the next size larger, tapping, and inserting the new bead. The most important thing is that the Kit saves you time, giving faster work turnaround in the shop, which makes you more money. It also eliminates “patching-up” the original hole (which often then requires repairing the blue, too) and redrilling and tapping for the original size shank. And, it gets your customer back in the field sooner which makes him happy, and makes you look good! Like the original Kit “A”, the workmanship is superb, the sight globes are true spheres, the threads are cut onto the shank, so they are clean, sharp, and give the best possible fit. And, they are threaded right up to the base of the bead so you can set the sight exactly onto the barrel.Thread sizes are 6-48 and 8-40; certainly two of the most common and popular thread sizes in the gun industry, so everyone has the necessary drills and taps. The bead sizes are .067, .130 and .175, again the most popular sizes, and the same as those used in Kit “A”.The Gold beads are machined from finest brass; the White beads from tough stainless steel. Because these are solid metal beads, they cannot bleed, chip, peel or have the color wear off.As the companion to Kit “A”, Kit “B” also comes in a clear plastic counter case. Each individual sight number is in its own clearly identified box on a black tray. There are 10 sights of each number, giving you a total of 80 new sights. By itself, a complete inventory of 3 very popular sizes in 2 colors, with 6-48 and 8-40 shanks; but as a companion to Kit “A”, an unbeatable assortment of the most versatile and useful shotgun sight beads available anywhere. And, right at your fingertips, ready to install for your customers. Order your Brownells Shotgun Sight Kit “B” today.Refill Sights for Kit "B" - Refills for the Shotgun Sight Kit “B” are single or 10-pak of sights of one number.
SPECS: Brass and Stainless Steel Beads in 3½" (8.9cm) x 7" (17.9cm) clear plastic box.
Other Shotgun Sight Kits:
SHOTGUN SIGHT KIT "B" CONTAINS: | NO. | HEAD DIA. | SHAFT/ THREAD | DRILL/TAP SIZE | COLOR |
| 21 | .067" | 6-48 | No. 31-6-48 | Gold |
| 22 | .130" | 6-48 | No. 31-6-48 | Gold |
| 23 | .130" | 8-40 | No. 28-8-40 | Gold |
| 24 | .175" | 8-40 | No. 28-8-40 | Gold |
| 25 | .067" | 6-48 | No. 31-6-48 | White |
| 26 | .130" | 6-48 | No. 31-6-48 | White |
| 27 | .130" | 8-40 | No. 28-8-40 | White |
| 28 | .175" | 8-40 | No. 28-8-40 | White |
¡Mejora tu inventario de miras para escopetas con el Kit de Mirillas "B" de Brownells!
El Kit de Mirillas para Escopetas "B" de Brownells es la mejora más importante en el campo de las miras de reemplazo desde la introducción del Kit original de Mirillas para Escopetas hace casi 20 años. Este nuevo kit es el compañero natural y lógico del Kit "A", proporcionándote, como armero o tienda de deportes, todas las miras que el Kit "A" no contiene, pero que necesitas para tener un inventario de miras de reemplazo realmente versátil y completo en solo 2 pequeñas cajas.
Además, en el Kit "B", hemos tomado la medida práctica de fabricar las perlas blancas de acero inoxidable. El acero inoxidable es más fuerte, no se aplastará ni deformará cuando se instalen las perlas, no necesita ser removido cuando el arma se sumerge en la solución de azulado caliente (¡y no se disolverá ni arruinará tu baño de azulado una vez que esté allí!). Además, el acero inoxidable no se romperá en la parte superior del vástago, permanece brillante para siempre, resiste un uso más exigente en el campo y, en general, es una mirilla mucho mejor.
Pero, la verdadera ventaja del Kit "B" es que al combinarlo con el Kit "A", ahora puedes tener una selección de tamaños de vástago sin igual entre las miras de escopeta. Así que, si recibes un arma en tu tienda con un agujero de mira malformado, desgastado o despojado, tendrás una perla del mismo tamaño, pero con un vástago un tamaño más grande. El reemplazo es entonces simplemente una cuestión de taladrar el agujero al siguiente tamaño más grande, roscar e insertar la nueva perla.
Lo más importante es que el Kit te ahorra tiempo, ofreciendo un retorno de trabajo más rápido en la tienda, lo que te genera más dinero. También elimina el "parcheo" del agujero original (que a menudo requiere reparar el azulado también) y volver a taladrar y roscar para el tamaño original del vástago. Y, hace que tu cliente vuelva al campo más pronto, lo que lo hace feliz y te hace ver bien.
Características del Producto
- Tamaños de rosca: 6-48 y 8-40; dos de los tamaños de rosca más comunes y populares en la industria de armas.
- Tamaños de perlas: .067, .130 y .175, nuevamente los tamaños más populares, iguales a los utilizados en el Kit "A".
- Las perlas doradas están mecanizadas de latón de la mejor calidad; las perlas blancas de acero inoxidable resistente.
- Las perlas de metal sólido no pueden sangrar, astillarse, pelarse ni perder color.
Como compañero del Kit "A", el Kit "B" también viene en una caja de plástico transparente. Cada número de mirilla individual está en su propia caja claramente identificada sobre una bandeja negra. Hay 10 mirillas de cada número, lo que te da un total de 80 nuevas mirillas. Por sí mismo, es un inventario completo de 3 tamaños muy populares en 2 colores, con vástagos de 6-48 y 8-40; pero como compañero del Kit "A", es una colección inigualable de las perlas de mirilla más versátiles y útiles disponibles en cualquier lugar. ¡Y, justo al alcance de tu mano, listas para instalar para tus clientes!
¡Ordena tu Kit de Mirillas para Escopetas "B" de Brownells hoy!
Refills para el Kit "B" - Recargas para el Kit de Mirillas para Escopetas "B" están disponibles en una unidad o en un paquete de 10 mirillas de un solo número.
ESPECIFICACIONES: Perlas de latón y acero inoxidable en caja de plástico clara de 3½" (8.9cm) x 7" (17.9cm).