The rear sight on your gun needs to be removed to install your red dot on this plate. This plate only works with the Vortex Venom. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Will not work with Sig Sauer M178 or Sig Sauers cut for the Romeo1 Pro
¡Mejora tu puntería con el adaptador SIG SAUER P320!
El adaptador de EGW para el SIG SAUER P320 te permite instalar una mira red dot Vortex Venom de manera sencilla. A continuación, te mostramos cómo hacerlo:
Instrucciones de Instalación
- Retira la mira trasera*
- Instala el EGW Sight Mount en la muesca
- Coloca la mira red dot en el EGW Sight Mount (colocar un pequeño trozo de papel entre la mira red dot y el soporte facilitará la extracción y evitará que el Loctite se adhiera a la mira red dot).
- Aplica Loctite azul a los tornillos de montaje proporcionados
- Ajusta los tornillos de montaje a 15 in/lbs
Recuerda que la modificación de tu arma puede anular la garantía del fabricante. Este producto debe ser instalado y revisado por un armero calificado. No se asume responsabilidad por daños o lesiones que puedan resultar de una instalación o uso incorrecto de este producto.
Nota: No es compatible con Sig Sauer M178 ni con los cortes de Sig Sauer para el Romeo1 Pro.