The QUAD is a pistol compensator from the Strike Micro Threaded Comp (SMTC) line that can work with just about any size slide using a threaded barrel with 1/2"x28 Threads Per Inch (TPI). The wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle rise. SI internal testing has typically seen a reduction average range (dependent on application) of 15-30% in felt recoil. This QUAD version in the SMTC line has a built-in anti-rotation system using the front tip of the pistol guide rod for most applications other than pistols with a flush guide/recoil rod system. With the clamp style design on the SMTC QUAD, timing the comp is simple including a secure and tight fitment. Originally designed for smaller compact, sub-compact and micro sized pistols, the SI styling of this QUAD pairs aesthetically well with most OEM and aftermarket slides on the market including full size pistols. Made from S45C steel with HRC40-45 heat treatment and a black oxide finish, the Strike Micro Threaded Comp – QUAD offers a smaller threaded barrel compensator option for your pistol with SI style. Package Contents: x1 Strike Micro Threaded Comp – QUAD x1 Set screw [M4x12mm] x1 Torx tool [T20] x1 Waning card Product Features: Micro compensator that can work with just about any size slide using threaded barrel (1/2”-28 TPI) Built-in anti-rotation system using front tip of guide rod (when applicable) Wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle rise Secure tight fitment with easy timing clamp style design SI styling which matches most OEM and aftermarket slides on the market Designed to work with micro, sub-compact, compact and full size pistols Made from S45C steel with HRC40-45 heat treatment and black oxide finish COMPATIBILITY: With any 1/2”x28 TPI threaded barrel Calibers: 9mm and .357 SIG NOT COMPATIBLE: Built-in anti-rotation system may not work with pistols using flush guide/recoil rod systems WARNING: Due to the reduction of slide energy, recoil spring tuning will be required when using this compensator Torque: Set screw to exactly 40 in/lbs (4.5 Nm) NOTE: Recommended to re-apply Loctite® Threadlocker Blue 243® anytime set screw is removed before reinstalling -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Compensador de pistola de alto rendimiento
El QUAD es un compensador de pistola de la línea Strike Micro Threaded Comp (SMTC) que puede funcionar con casi cualquier tamaño de corredera utilizando un cañón roscado con rosca de 1/2"x28 TPI. Su diseño innovador y funcionalidad lo convierten en una excelente opción para mejorar tu experiencia de disparo.
Descripción del producto
La amplia pared frontal del compensador redirige los gases para mitigar el retroceso sentido y reducir el levantamiento del cañón. Las pruebas internas de SI han mostrado típicamente una reducción promedio de entre el 15% y el 30% en el retroceso sentido, dependiendo de la aplicación. Esta versión QUAD de la línea SMTC cuenta con un sistema de anti-rotación integrado que utiliza la punta del vástago de guía de la pistola para la mayoría de las aplicaciones, excepto para pistolas con sistemas de vástago de guía/recoil flush.
Con el diseño de estilo clamp en el SMTC QUAD, sincronizar el compensador es simple, asegurando un ajuste seguro y ceñido. Originalmente diseñado para pistolas compactas, sub-compactas y de tamaño micro, el estilo de SI de este QUAD combina estéticamente bien con la mayoría de las correderas OEM y de mercado secundario, incluyendo pistolas de tamaño completo.
Contenido del paquete
- x1 Strike Micro Threaded Comp – QUAD
- x1 Tornillo de ajuste [M4x12mm]
- x1 Herramienta Torx [T20]
- x1 Tarjeta de advertencia
Características del producto
- Compensador micro que puede funcionar con casi cualquier tamaño de corredera utilizando un cañón roscado (1/2”-28 TPI)
- Sistema de anti-rotación integrado utilizando la punta del vástago de guía (cuando sea aplicable)
- Amplia pared frontal que redirige los gases para mitigar el retroceso sentido y reducir el levantamiento del cañón
- Ajuste seguro y ceñido con diseño de estilo clamp para fácil sincronización
- Estilo SI que combina con la mayoría de las correderas OEM y de mercado secundario
- Diseñado para funcionar con pistolas micro, sub-compactas, compactas y de tamaño completo
- Fabricado en acero S45C con tratamiento térmico HRC40-45 y acabado en óxido negro
Compatibilidad
Compatible con cualquier cañón roscado de 1/2”x28 TPI.
Calibres: 9mm y .357 SIG.
No compatible
El sistema de anti-rotación integrado puede no funcionar con pistolas que utilizan sistemas de vástago de guía/recoil flush.
Advertencia
Debido a la reducción de energía de la corredera, será necesario ajustar el resorte de retroceso al usar este compensador.
Torque
Ajustar el tornillo de ajuste a exactamente 40 in/lbs (4.5 Nm).
Nota: Se recomienda volver a aplicar Loctite® Threadlocker Blue 243® cada vez que se retire el tornillo de ajuste antes de reinstalarlo.
Advertencia de la Proposición 65 de California
Advertencia: Este producto contiene químicos que el Estado de California reconoce como causantes de cáncer y defectos de nacimiento u otros daños reproductivos. Para más información: www.P65Warnings.ca.gov.