There is a screw in the front of the original mount that is located underneath the handguard. The handguard must be removed and then this screw must also be removed before the original mount can be removed. Removing the original mount may be a difficult task. Please use caution when removing the original mount and when installing EGW mount. EGW always recommends having their products installed by a competent and qualified gunsmith. Metric screws are only available with hex heads. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Recommend: 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Mejora tu precisión con el montaje EGW para TIKKA T3X TAC A1
Este montaje de TIKKA T3X TAC A1 HD Picatinny Scope Mount es la elección perfecta para los cazadores y tiradores tácticos. A continuación, te ofrecemos más detalles sobre este producto:
Descripción del Producto
Hay un tornillo en la parte frontal del montaje original que se encuentra debajo del guardamanos. Debes retirar el guardamanos y también quitar este tornillo antes de poder retirar el montaje original. Quitar el montaje original puede ser una tarea difícil, así que ten cuidado al hacerlo y al instalar el montaje EGW. Siempre se recomienda que un armero competente y calificado instale sus productos.
- Los tornillos métricos solo están disponibles con cabezas hexagonales.
- Se recomienda medir el espaciado de los agujeros en tu receptor para confirmar que coincide con las dimensiones publicadas por EGW.
- Las ranuras cruzadas Picatinny recorren toda la longitud del riel, lo que brinda flexibilidad al montar anillas de mira y otros accesorios.
Los montajes de mira de una sola pieza de EGW son la elección obvia para cazadores y tiradores tácticos por igual. Este montaje es una base de estilo Picatinny y es compatible con anillas de mira Picatinny o Weaver. EGW los fabrica en su taller utilizando uno de sus centros de mecanizado. Después del mecanizado, los montajes son pulidos, arenados y anodizados tipo III para una durabilidad prolongada.
Recomendaciones
Recomendamos un ángulo de 20 MOA si vas a disparar entre 500 y 1000 yardas. Al poner a cero tu rifle con un montaje de 20 MOA, EGW sugiere hacerlo a 200 yardas.
Instalación
EGW recomienda un torque de 20 pulgadas-libras y una gota de loctite azul (loctite se vende por separado). Todo el montaje y los accesorios (desde los tornillos de montaje y la llave hasta el embalaje) están fabricados en los EE. UU.