Saves the frustration of trying to get the factory spring s crook back into the receiver. Fits all AK-47 and SAR-3 receivers.
SPECS: Steel, black, matte finish.
Más...
Limpio rompiendo gatillo ayuda a mejorar el rendimiento
Ahorra la frustración de intentar conseguir el ladrón fábrica primavera s de nuevo en el receptor. Se adapta a todos los receptores de AK-47 y SAR-3.
Especificaciones: acero, negro, acabado mate.
Más...
Evaluaciones de clientes para POWER CUSTOM TRIGGER PIN RETAINER PLATE
Número de evaluaciones: 9
De brownells.com: 9
Evaluación media: 4,8
great product(12/07/2010)
Just likethe Krebs Custom retaining plate, and now you don't have to fool with that awful shephards crook. 5 second install, and much stronger than the factory thin wire, in most AK variants.
POWER CUSTOM TRIGGER PIN RETAINER PLATE(28/02/2011)
Works great, easier to install than Tapco or that darn spring, might save you a minute's fooling around. But 2 1/2 times as expensive?
worked and fit well on my mak 90(17/10/2012)
Slipped right in with the tapco double hook trigger group. Did it job of locking the pin in well. Easy to install and well built quality product.
works great, highly recommend(05/02/2013)
Works great and installs with no effort. Safety lever holds it in place. Very nice.
Good stuff. Fits Russian Saiga MK-03(27/05/2013)
Purchased it for my Saiga MK-03. Installation takes 3 min. Works well - similar to the stock spring, but now it is much easier to assembly/disassembly trigger group.
One of the greatest things ever made!!!(08/06/2013)
I will always buy one of these retainers before every build! The only negative was that I had to use a dremel to cut out a notch after adding a side mount for a scope. It would really be great if the notch that I had to add was already cut in so that I didn't have to do it!
Fitting needed for Yugos(11/12/2017)
I installed this in my M92 PAP pistol. I had to file the notch for the trigger pin larger due to the distance between the trigger pin and safety selector hole being longer than designed. Overall good product but there might be a better part on the market for Yugos.
AK retaainer works perfect(31/01/2018)
Works just as described and super simple installation. This part really makes assembly of the AK fire control group a snap.
Fits my O-PAP(10/04/2018)
I put this in my Yugo O-Pap and it didnt appear to need any fitting. It went right in and appears to be working as designed.
N.º de producto: 713000017 POWER CUSTOM TRIGGER PIN RETAINER PLATE Ref Fabricante: NONE Ahorra la frustración de intentar conseguir el ladrón fábrica primavera s de nuevo en el receptor. Se adapta a todos los receptores de AK-47 y SAR-3.
13.9EUR5313,90 €
*17,96 €
Plazo de entrega de aproximadamente 14-21 días. Más de 10 pcs. en almacén de EE.UU.
Hacer:
AK-47
Peso de entrega: 0,045kgAltura: 5mmAnchura: 84mmLongitud: 99mm
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Saves the frustration of trying to get the factory spring s crook back into the receiver. Fits all AK-47 and SAR-3 receivers.
SPECS: Steel, black, matte finish.
Más...
Limpio rompiendo gatillo ayuda a mejorar el rendimiento
Ahorra la frustración de intentar conseguir el ladrón fábrica primavera s de nuevo en el receptor. Se adapta a todos los receptores de AK-47 y SAR-3.
Especificaciones: acero, negro, acabado mate.
Más...
Evaluaciones de clientes para POWER CUSTOM TRIGGER PIN RETAINER PLATE
Número de evaluaciones: 9
De brownells.com: 9
Evaluación media: 4,8
great product(12/07/2010)
Just likethe Krebs Custom retaining plate, and now you don't have to fool with that awful shephards crook. 5 second install, and much stronger than the factory thin wire, in most AK variants.
POWER CUSTOM TRIGGER PIN RETAINER PLATE(28/02/2011)
Works great, easier to install than Tapco or that darn spring, might save you a minute's fooling around. But 2 1/2 times as expensive?
worked and fit well on my mak 90(17/10/2012)
Slipped right in with the tapco double hook trigger group. Did it job of locking the pin in well. Easy to install and well built quality product.
works great, highly recommend(05/02/2013)
Works great and installs with no effort. Safety lever holds it in place. Very nice.
Good stuff. Fits Russian Saiga MK-03(27/05/2013)
Purchased it for my Saiga MK-03. Installation takes 3 min. Works well - similar to the stock spring, but now it is much easier to assembly/disassembly trigger group.
One of the greatest things ever made!!!(08/06/2013)
I will always buy one of these retainers before every build! The only negative was that I had to use a dremel to cut out a notch after adding a side mount for a scope. It would really be great if the notch that I had to add was already cut in so that I didn't have to do it!
Fitting needed for Yugos(11/12/2017)
I installed this in my M92 PAP pistol. I had to file the notch for the trigger pin larger due to the distance between the trigger pin and safety selector hole being longer than designed. Overall good product but there might be a better part on the market for Yugos.
AK retaainer works perfect(31/01/2018)
Works just as described and super simple installation. This part really makes assembly of the AK fire control group a snap.
Fits my O-PAP(10/04/2018)
I put this in my Yugo O-Pap and it didnt appear to need any fitting. It went right in and appears to be working as designed.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.