Forster makes a collet style bullet puller for standard seven eigths thru 14 threaded presses and a second collet style puller (both use the same Forster collets) for the Co-Ax Press. The FBP1010 puller for standard presses includes a collet tightening handle on top of the puller body. The FUP1010 Puller has a nine sixteenths inch hex top on the puller body which requires a wrench to tighten the collet. Both pullers easily remove bullets from almost any cartridge. Collets are sold separately.
Más...
Forster fabrica un extractor de balas tipo collet para prensas estándar de siete octavos a 14 roscas y un segundo extractor tipo collet (ambos utilizan los mismos collets de Forster) para la prensa Co-Ax. El extractor FBP1010 para prensas estándar incluye una manija para apretar el collet en la parte superior del cuerpo del extractor. El extractor FUP1010 tiene una parte superior hexagonal de nueve dieciseisavos de pulgada en el cuerpo del extractor, lo cual requiere una llave para apretar el collet. Ambos extractores retiran fácilmente las balas de casi cualquier cartucho. Los collets se venden por separado.
Más...
Evaluaciones de clientes para FORSTER PRODUCTS, INC. UNIVERSAL BULLET PULLER, COLLETS NOT INCLUDED
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 2,7
Disapointing design(29/01/2012)
I purchased the puller from Sinclair along with three collets, thereby saving money rather than Forster dirctly. The puller I chose was the "Universal" with the hex head as in pic. The hex head is a soft metal nut, thread glued on a minor thread. On the second cartridge (6.5 x 55), the thread lock gave up and the hex head /nut, turned on its own. I am now left with no option but to use padded vice grips to extract the "collet screw body. Why not use a one piece "bolt". Remember the principle of KISS, less to go wrong. The quality of the collets however is high, but the "gripping force" exerted inside the puller by a tapering surface could be better finished, probably such tightening force was required. I would have gone for the Hornady Cam Lock, but, I don`t believe you can cover two calibers with one collet, 6.5/.264 & .257 Also, from Forsters I purchased a dozen pack of die lock rings. I was very disapointed to find them to be soft alloy. Now I happily find Sinclair do their own lock rings in stainless, well done.
Sent it back - would not buy again(15/06/2012)
Not up to the usual Forster quality. The collect nut is held on by lock-tite and came un-screwed on the tenth bullet I pulled. Do not waste your money.
Revised!(29/01/2015)
Product has been revised and now has an allen set screw that appears to be deep enough to seat into (or past) the threads of the collet pusher assembly. No way for the nut to turn now. Simple fix that should have been there from the beginning..., but live and learn. Buy with confidence, especially if you have a Forster Co-Ax press.
N.º de producto: 749002538 FORSTER PRODUCTS, INC. UNIVERSAL BULLET PULLER, COLLETS NOT INCLUDED Ref Fabricante: UP1010757253996863 Forster fabrica un extractor de balas tipo collet para prensas estándar de siete octavos a 14 roscas y un segundo extractor tipo collet (ambos utilizan los mismos collets de Forster) para la prensa Co-Ax. El extractor FBP1010 para prensas estándar incluye una manija para apretar el collet en la parte superior del cuerpo del extractor. El extractor FUP1010 tiene una parte superior hexagonal de nueve dieciseisavos de pulgada en el cuerpo del extractor, lo cual requiere una llave para apretar el collet. Ambos extractores retiran fácilmente las balas de casi cualquier cartucho. Los collets se venden por separado.
39.9EUR539,90 €
*
Plazo de entrega de aproximadamente 14-21 días. 5 pcs. en el almacén de EE.UU.
Forster makes a collet style bullet puller for standard seven eigths thru 14 threaded presses and a second collet style puller (both use the same Forster collets) for the Co-Ax Press. The FBP1010 puller for standard presses includes a collet tightening handle on top of the puller body. The FUP1010 Puller has a nine sixteenths inch hex top on the puller body which requires a wrench to tighten the collet. Both pullers easily remove bullets from almost any cartridge. Collets are sold separately.
Más...
Forster fabrica un extractor de balas tipo collet para prensas estándar de siete octavos a 14 roscas y un segundo extractor tipo collet (ambos utilizan los mismos collets de Forster) para la prensa Co-Ax. El extractor FBP1010 para prensas estándar incluye una manija para apretar el collet en la parte superior del cuerpo del extractor. El extractor FUP1010 tiene una parte superior hexagonal de nueve dieciseisavos de pulgada en el cuerpo del extractor, lo cual requiere una llave para apretar el collet. Ambos extractores retiran fácilmente las balas de casi cualquier cartucho. Los collets se venden por separado.
Más...
Evaluaciones de clientes para FORSTER PRODUCTS, INC. UNIVERSAL BULLET PULLER, COLLETS NOT INCLUDED
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 2,7
Disapointing design(29/01/2012)
I purchased the puller from Sinclair along with three collets, thereby saving money rather than Forster dirctly. The puller I chose was the "Universal" with the hex head as in pic. The hex head is a soft metal nut, thread glued on a minor thread. On the second cartridge (6.5 x 55), the thread lock gave up and the hex head /nut, turned on its own. I am now left with no option but to use padded vice grips to extract the "collet screw body. Why not use a one piece "bolt". Remember the principle of KISS, less to go wrong. The quality of the collets however is high, but the "gripping force" exerted inside the puller by a tapering surface could be better finished, probably such tightening force was required. I would have gone for the Hornady Cam Lock, but, I don`t believe you can cover two calibers with one collet, 6.5/.264 & .257 Also, from Forsters I purchased a dozen pack of die lock rings. I was very disapointed to find them to be soft alloy. Now I happily find Sinclair do their own lock rings in stainless, well done.
Sent it back - would not buy again(15/06/2012)
Not up to the usual Forster quality. The collect nut is held on by lock-tite and came un-screwed on the tenth bullet I pulled. Do not waste your money.
Revised!(29/01/2015)
Product has been revised and now has an allen set screw that appears to be deep enough to seat into (or past) the threads of the collet pusher assembly. No way for the nut to turn now. Simple fix that should have been there from the beginning..., but live and learn. Buy with confidence, especially if you have a Forster Co-Ax press.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.