MAGPUL MOE QUICK DETACH BIPOD FOR M-LOK Magpul offered a variety of bipods for quite some time, but none have attached as simply and quickly as the MOE QD Bipod for M-LOK. This new bipod provides shooters a quick-attach and detach function when using guns with an M-LOK hand guard or forend; by speeding up the attachment process via the integral attachment knob, you can get support when firing faster than ever before. To attach the bipod, simply insert the M-LOK stud into the M-LOK slot, rotate the bipod 45° counterclockwise so the stud is perpendicular to the M-LOK slot, and tighten the adjustment knob to securely fasten against the forend. No tools required. Aside from the quick, simple attachment method, the bipod is almost 40% lighter than some of thier existing bipods. The injection-molded construction won’t deform or break under pressure, and it provides a consistent, stable platform from which to shoot. The bipod plate – made from the same injection-molded material as the bipod itself – provides a solid mounting surface and features two (2) additional M-LOK lugs to promote proper alignment after installation, as well as increased stability and durability during recoil. The bipod is also equipped with a low-profile sling stud on the rear to allow sling attachment for easy carry and transportation of the firearm. The MOE QD bipod has a low stack height of 1.7” when folded, giving it a streamlined profile when the legs are stowed. When the legs are needed, they deploy and stow with the push of a button, snapping and locking into position. The legs extend from 7" to 10" and are adjusted easily and independently via a button located at the top of each leg. Within this adjustment range, there are seven (7) ½" spaced locking detents to fine tune the bipod’s deployed height. Additionally, the bipod’s soft, stepped, non-slip rubber feet grip a wide array of shooting surfaces; the feet are also easily removed with a roll-pin punch should shooters want to change them to something different (the bipod accepts most Atlas-pattern bipod feet). FEATURES: QUICK, SIMPLE INSTALLATION: The MOE QD Bipod installs via an adjustment knob Minimizes installation requirements since no other hardware is required COMPACT, LIGHTWEIGHT: 40% lighter than some other Magpul bipods Stack height of 1.7”; when extended legs measure 7”-10” in 0.5” increments VERSATILE LEGS AND FEET: Soft, stepped, non-slip rubber feet grip a wide array of shooting surfaces; the feet are also easily removed with a roll-pin punch Legs accept most Atlas-pattern bipod replaceable feet to best match the needs of your environment SPECIFICATIONS: Attachment: M-LOK Slots Materials: Polymer, steel Height, max: 10 in. Pan and Tilt: No Weight: 9 oz. Made in the USA.
¡Descubre la nueva bipode MOE QD para M-LOK de MAGPUL!
La Bipode MOE Quick Detach para M-LOK de MAGPUL es la solución perfecta para quienes buscan un sistema de soporte rápido y eficiente. Este bipode ha sido diseñado para ofrecer un método de acoplamiento y desacoplamiento sencillo, ideal para armas con guardamanos o forends M-LOK.
Descripción del Producto
Con un innovador knob de sujeción, podrás fijar el bipode en un instante, permitiéndote disparar con mayor rapidez. Para instalarlo, simplemente inserta el estudio M-LOK en la ranura correspondiente, rota el bipode 45° en sentido antihorario hasta que el estudio esté perpendicular a la ranura, y ajusta el knob para asegurar el bipode al forend. ¡No se requieren herramientas!
Este bipode es casi un 40% más ligero que otros modelos existentes, lo que lo hace muy práctico. Su construcción moldeada por inyección garantiza que no se deforme ni rompa bajo presión, ofreciendo una plataforma estable y consistente para disparar. La placa del bipode, fabricada con el mismo material, proporciona una superficie de montaje sólida y cuenta con dos (2) lengüetas M-LOK adicionales para asegurar una correcta alineación tras la instalación, así como mayor estabilidad y durabilidad durante el retroceso.
Además, el bipode está equipado con un estudio de perfil bajo en la parte trasera para permitir la sujeción de una correa, facilitando el transporte del arma.
Características
- INSTALACIÓN RÁPIDA Y SENCILLA: El bipode MOE QD se instala mediante un knob de ajuste, minimizando los requisitos de instalación ya que no se necesita otro hardware.
- COMPACTO Y LIGERO: Es un 40% más ligero que otros bipodes de Magpul, con una altura de apilamiento de 1.7”; las patas extendidas miden de 7” a 10” en incrementos de 0.5”.
- PATAS Y PIEZAS VERSÁTILES: Las patas de goma suave y antideslizante se adaptan a una amplia variedad de superficies de disparo; también son fácilmente removibles con un punzón de pasador. Las patas aceptan la mayoría de las piezas de bipode de patrón Atlas para adaptarse mejor a tus necesidades.
Especificaciones
- Conexión: Ranuras M-LOK
- Materiales: Polímero, acero
- Altura máxima: 10 in.
- Pan y Tilt: No
- Peso: 9 oz.
- Fabricado en: EE. UU.