MAGPUL MOE QUICK DETACH BIPOD FOR M-LOK Magpul offered a variety of bipods for quite some time, but none have attached as simply and quickly as the MOE QD Bipod for M-LOK. This new bipod provides shooters a quick-attach and detach function when using guns with an M-LOK hand guard or forend; by speeding up the attachment process via the integral attachment knob, you can get support when firing faster than ever before. To attach the bipod, simply insert the M-LOK stud into the M-LOK slot, rotate the bipod 45° counterclockwise so the stud is perpendicular to the M-LOK slot, and tighten the adjustment knob to securely fasten against the forend. No tools required. Aside from the quick, simple attachment method, the bipod is almost 40% lighter than some of thier existing bipods. The injection-molded construction won’t deform or break under pressure, and it provides a consistent, stable platform from which to shoot. The bipod plate – made from the same injection-molded material as the bipod itself – provides a solid mounting surface and features two (2) additional M-LOK lugs to promote proper alignment after installation, as well as increased stability and durability during recoil. The bipod is also equipped with a low-profile sling stud on the rear to allow sling attachment for easy carry and transportation of the firearm. The MOE QD bipod has a low stack height of 1.7” when folded, giving it a streamlined profile when the legs are stowed. When the legs are needed, they deploy and stow with the push of a button, snapping and locking into position. The legs extend from 7" to 10" and are adjusted easily and independently via a button located at the top of each leg. Within this adjustment range, there are seven (7) ½" spaced locking detents to fine tune the bipod’s deployed height. Additionally, the bipod’s soft, stepped, non-slip rubber feet grip a wide array of shooting surfaces; the feet are also easily removed with a roll-pin punch should shooters want to change them to something different (the bipod accepts most Atlas-pattern bipod feet). FEATURES: QUICK, SIMPLE INSTALLATION: The MOE QD Bipod installs via an adjustment knob Minimizes installation requirements since no other hardware is required COMPACT, LIGHTWEIGHT: 40% lighter than some other Magpul bipods Stack height of 1.7”; when extended legs measure 7”-10” in 0.5” increments VERSATILE LEGS AND FEET: Soft, stepped, non-slip rubber feet grip a wide array of shooting surfaces; the feet are also easily removed with a roll-pin punch Legs accept most Atlas-pattern bipod replaceable feet to best match the needs of your environment SPECIFICATIONS: Attachment: M-LOK Slots Materials: Polymer, steel Height, max: 10 in. Pan and Tilt: No Weight: 9 oz. Made in the USA.
¡Descubre la nueva MOE QUICK DETACH BIPOD para M-LOK!
La MOE QUICK DETACH BIPOD para M-LOK de MAGPUL es la solución perfecta para los tiradores que buscan una forma rápida y sencilla de montar su bipode. Con un diseño innovador, este bipode se une a tu arma de fuego con facilidad y rapidez.
Descripción del Producto
MAGPUL ha ofrecido una variedad de bipodes durante bastante tiempo, pero ninguno se ha acoplado tan fácil y rápidamente como el MOE QD Bipod para M-LOK. Este nuevo bipode proporciona a los tiradores una función de acoplamiento y desacoplamiento rápido al usar armas con un guardamanos o forend M-LOK. Al acelerar el proceso de acoplamiento a través del botón de ajuste integral, puedes obtener soporte al disparar más rápido que nunca.
Para acoplar el bipode, simplemente inserta el stud M-LOK en la ranura M-LOK, gira el bipode 45° en sentido antihorario para que el stud quede perpendicular a la ranura M-LOK y ajusta el botón de ajuste para fijarlo de manera segura contra el forend. No se requieren herramientas.
Aparte del método de acoplamiento rápido y sencillo, el bipode es casi un 40% más ligero que algunos de sus bipodes existentes. La construcción moldeada por inyección no se deformará ni romperá bajo presión, y proporciona una plataforma estable y consistente desde la cual disparar. La placa del bipode, hecha del mismo material moldeado por inyección que el propio bipode, ofrece una superficie de montaje sólida y cuenta con dos (2) lugs M-LOK adicionales para promover una alineación adecuada después de la instalación, así como mayor estabilidad y durabilidad durante el retroceso.
El bipode también está equipado con un stud de sling de perfil bajo en la parte trasera para permitir la sujeción de un sling, facilitando el transporte del arma de fuego.
Características
- INSTALACIÓN RÁPIDA Y SENCILLA: El MOE QD Bipod se instala a través de un botón de ajuste, minimizando los requisitos de instalación ya que no se necesita otro hardware.
- COMPACTO Y LIGERO: Un 40% más ligero que otros bipodes de Magpul. Altura de apilamiento de 1.7”; cuando los patas están extendidas, miden de 7” a 10” en incrementos de 0.5”.
- PATAS Y PIEZAS VERSÁTILES: Las patas de goma suave y antideslizante agarran una amplia variedad de superficies de disparo; las patas también se pueden quitar fácilmente con un punzón de pasador. Las patas aceptan la mayoría de las patas reemplazables de patrón Atlas para adaptarse mejor a las necesidades de tu entorno.
Especificaciones
- Acoplamiento: Ranuras M-LOK
- Materiales: Polímero, acero
- Altura máxima: 10 in.
- Pan y Tilt: No
- Peso: 9 oz.
- Hecho en EE. UU.