The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35 degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45 degree position provides additional clearance around wider turrets or larger, higher magnification scopes. The Arisaka Offset Optic Mount is designed to be attached to the top Picatinny rail of an AR15 rifle. When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height. The base and optic plates can be reversed, allowing for use on the left or right side. The base and plates can each be purchased separately or as a combination, providing an upgrade path in the future as users acquire new red dot sights. Weight: 1.9 oz without optic. Length: 1.0" for the base, which occupies three Picatinny slots (twin recoil lugs and clamping screw). Height: The base sits 0.180" above the surface of the Picatinny rail. The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized. IP20 and IP27 Torx Plus bit drivers are included with each base. Standard height (for 1.5" to 1.8" scope mounts): Plate 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 6: Aimpoint Acro Tall height (1.9" to 2.2" scope mounts): Plate 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T Plate 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 12: Aimpoint Acro
Montura Óptica Offset de Arisaka: La Solución Perfecta para tu Visor
La montura óptica offset de Arisaka, con patente pendiente, es una solución modular que permite al usuario seleccionar una posición de 35 o 45 grados para un punto rojo sin necesidad de componentes adicionales. La posición de 35 grados acerca el punto rojo a visores más delgados y pequeños, mientras que la posición de 45 grados proporciona un mayor espacio alrededor de torretas más anchas o visores de mayor magnificación.
Características del Producto:
- Diseñada para ser montada en la riel Picatinny superior de un rifle AR15.
- Cuando el rifle se inclina para utilizar el punto rojo offset, el óptico se mantiene centrado sobre el cañón y mantiene una altura de co-testigo de 1/3 más baja.
- Las bases y placas pueden invertirse, permitiendo su uso en el lado izquierdo o derecho.
- Las bases y placas se pueden comprar por separado o como combinación, ofreciendo una opción de actualización en el futuro a medida que adquieras nuevos puntos rojos.
Peso: 1.9 oz sin óptica.
Longitud: 1.0" para la base, que ocupa tres ranuras Picatinny (con dos lengüetas de retroceso y un tornillo de sujeción).
Altura: La base se sitúa a 0.180" sobre la superficie de la riel Picatinny. La montura está mecanizada CNC a partir de aluminio 6061-T6 y anodizada con un recubrimiento duro MIL-A-8625 Tipo III. Se incluyen controladores de bits Torx Plus IP20 e IP27 con cada base.
Compatibilidad de Placas:
Altura estándar (para monturas de visores de 1.5" a 1.8"):
- Placa 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Placa 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice
- Placa 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Placa 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (no 5X), Holosun HS403 (no A), HS503, HS515, HS530
- Placa 6: Aimpoint Acro
Altura alta (para monturas de visores de 1.9" a 2.2"):
- Placa 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Placa 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T
- Placa 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Placa 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (no 5X), Holosun HS403 (no A), HS503, HS515, HS530
- Placa 12: Aimpoint Acro