The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35 degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45 degree position provides additional clearance around wider turrets or larger, higher magnification scopes. The Arisaka Offset Optic Mount is designed to be attached to the top Picatinny rail of an AR15 rifle. When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height. The base and optic plates can be reversed, allowing for use on the left or right side. The base and plates can each be purchased separately or as a combination, providing an upgrade path in the future as users acquire new red dot sights. Weight: 1.9 oz without optic. Length: 1.0" for the base, which occupies three Picatinny slots (twin recoil lugs and clamping screw). Height: The base sits 0.180" above the surface of the Picatinny rail. The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized. IP20 and IP27 Torx Plus bit drivers are included with each base. Standard height (for 1.5" to 1.8" scope mounts): Plate 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 6: Aimpoint Acro Tall height (1.9" to 2.2" scope mounts): Plate 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T Plate 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 12: Aimpoint Acro
Montaje óptico offset versátil y modular
El montaje óptico offset Arisaka, con patente pendiente, es una solución de montaje modular que te permite seleccionar una posición de 35 o 45 grados para una mira red dot sin necesidad de componentes adicionales.
Características del producto:
- Posición a 35 grados: Acerca la mira red dot a miras más delgadas y pequeñas.
- Posición a 45 grados: Proporciona mayor espacio alrededor de torretas más anchas o miras de mayor aumento.
El montaje está diseñado para ser acoplado al riel Picatinny superior de un rifle AR15. Cuando el rifle está inclinado para utilizar la mira red dot offset, el óptico se mantiene centrado sobre el cañón y mantiene una altura de co-testimonio de 1/3 más baja. La base y las placas ópticas se pueden invertir, permitiendo su uso en el lado izquierdo o derecho.
La base y las placas se pueden adquirir por separado o como una combinación, proporcionando una ruta de actualización en el futuro a medida que adquieras nuevas miras red dot.
Especificaciones:
- Peso: 1.9 oz sin óptica.
- Longitud: 1.0" para la base, que ocupa tres ranuras Picatinny (con dos lengüetas de retroceso y un tornillo de sujeción).
- Altura: La base se sitúa a 0.180" sobre la superficie del riel Picatinny.
El montaje está fabricado con CNC de aluminio 6061-T6 y anodizado con un recubrimiento duro MIL-A-8625 Tipo III. Se incluyen controladores de bits Torx Plus IP20 e IP27 con cada base.
Placas estándar (para monturas de 1.5" a 1.8"):
- Placa 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Placa 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice
- Placa 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Placa 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (no 5X), Holosun HS403 (no A), HS503, HS515, HS530
- Placa 6: Aimpoint Acro
Placas altas (para monturas de 1.9" a 2.2"):
- Placa 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Placa 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T
- Placa 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Placa 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (no 5X), Holosun HS403 (no A), HS503, HS515, HS530
- Placa 12: Aimpoint Acro