Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. Quick-Release Scope Mount one-piece base with dual-lever system provides the same solid mounting and fast removal and reattachment.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 4½” (11.4cm) long. Each ring covers 1” (2.5cm) of scope tube length. Height measured from top of rail to bottom of scope body (both models): .890”.
Montura sólida y rápida para tu rifle
La montura RECON-S NO OFFSET es la solución perfecta para quienes buscan un montaje fiable y fácil de usar. Con su sistema de liberación rápida, podrás instalar y quitar tu visor en un instante.
Descripción del producto
El sistema de bloqueo con palanca de liberación rápida se sujeta firmemente al riel flattop y no se aflojará, incluso bajo un fuerte retroceso. Cuanto más fuerza actúe sobre la palanca, más se bloqueará. Simplemente presiona la pestaña de liberación para abrir la palanca, y la montura se levanta fácilmente del rifle.
Ajustable con un destornillador de cabeza plana o incluso una moneda, garantiza un ajuste ultra seguro y sin deslizamientos en casi cualquier riel estilo Picatinny o Weaver, incluyendo rieles comerciales de tamaño sobredimensionado o subdimensionado. La palanca se puede configurar para bloquear hacia adelante o hacia atrás, según la preferencia del operador.
La gran barra de bloqueo en el lado de la montura se engancha en la máxima cantidad de área del riel, mientras que el tornillo de cruz y los dos pernos de bloqueo integrales aseguran un acoplamiento sólido para prevenir el movimiento bajo retroceso. Cinco tornillos hexagonales de acero de alta resistencia (tres en la parte superior, dos en la parte inferior) aprietan las mitades del anillo divididas verticalmente. Los cortes en los lados del anillo y en la base reducen el peso sin sacrificar la resistencia.
La montura de visor de liberación rápida con base de una pieza y sistema de doble palanca proporciona el mismo montaje sólido y la rápida remoción y reataque.
Especificaciones
- Material: Aluminio 6061 T6, anodizado duro, negro mate.
- Longitud: 4½” (11.4cm).
- Cada anillo cubre 1” (2.5cm) de longitud del tubo del visor.
- Altura medida desde la parte superior del riel hasta la parte inferior del cuerpo del visor (ambos modelos): .890”.