Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. Quick-Release Scope Mount one-piece base with dual-lever system provides the same solid mounting and fast removal and reattachment.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 4½” (11.4cm) long. Each ring covers 1” (2.5cm) of scope tube length. Height measured from top of rail to bottom of scope body (both models): .890”.
Montura de alcance sólida y confiable
La montura RECON-S NO OFFSET SCOPE MOUNT de AMERICAN DEFENSE MANUFACTURING es la solución perfecta para quienes buscan un sistema de liberación rápida y una sujeción firme.
Descripción del producto
El sistema de bloqueo con palanca de liberación rápida se sujeta de manera sólida al riel flattop y no se aflojará, incluso bajo un fuerte retroceso; cuanto más fuerza actúe sobre la palanca, más se bloquea. Simplemente presiona la pestaña de liberación para abrir la palanca y la montura se levanta fácilmente del rifle.
Es ajustable con un destornillador de cabeza plana o incluso con una moneda, garantizando un ajuste ultra seguro y sin deslizamientos en casi cualquier riel estilo Picatinny o Weaver, incluyendo rieles comerciales sobredimensionados o subdimensionados. La palanca puede configurarse para bloquearse hacia el frente o hacia la parte trasera, según la preferencia del operador.
La gran barra de bloqueo en el lado de la montura se conecta con la máxima área del riel, mientras que el tornillo de cruz y dos lengüetas de bloqueo integrales aseguran un enganche sólido de las ranuras del riel para prevenir movimientos bajo el retroceso. Cinco tornillos hexagonales de acero de alta resistencia (tres en la parte superior, dos en la parte inferior) sujetan las mitades del anillo divididas verticalmente. Los cortes en los lados del anillo y en la base reducen el peso sin sacrificar la resistencia.
La montura de alcance de liberación rápida con base de una sola pieza y sistema de doble palanca proporciona la misma sujeción sólida y rápida para la remoción y reatachamiento.
Especificaciones
- Material: aluminio 6061 T6, anodizado duro, negro mate.
- Longitud: 4½” (11.4cm).
- Cada anillo cubre 1” (2.5cm) de longitud del tubo del alcance.
- Altura medida desde la parte superior del riel hasta la parte inferior del cuerpo del alcance (ambos modelos): .890”.