Carry more ammunition “at the ready”: Professional operators who are unwilling to sacrifice quality, performance, and durability, will find Mesa Tactical’s polymer shotshell carriers to be an especially attractive and economical alternative to the low-cost consumer grade plastic shell holders offered by competitors. SureShell® Polymer Shotshell Carriers are made from durable, impact resistant polymer. This shotshell carrier system, available in a six shell configuration, features shell holders injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. The SureShell Polymer Carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish. The Sureshell receiver mounting system for Remington 870, 1100 and 11-87 shotguns uses a combination of steel fasteners threaded into a steel pin (at the rear) and paired Chicago screws (up front) for more secure attachment to the shotgun without the risk of pinching the receiver. The mounting plate even features a window over the shotgun serial number location, to make it easier for armorers to inventory their weapons. Models are available with and without integral Picatinny rails for mounting optics. Like all SureShell carriers, the new polymer SureShell shotshell carriers work well in all climates and environments, and are designed to withstand the daily use and abuse to which arsenal weapons are commonly subjected. This system securely holds shells in place until needed at which time they are readily accessible and easily removed for rapid reloading.
SPECS: Injection molded from glass filled polymer, lightweight aluminum backplate, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Right Hand models only. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 6-Round Sidemount – 6¼” (15.8cm) long x 1½” high. 5.4 oz. (152g) wt. Rem 8-Round Sidemount – 7¾” (19.7) long x 1½” high. 7 oz. (200g) wt. Remington Picatinny fits models 870/1100/11-87 (may require modification to gun). 7” (15.8cm) long x 2½” (6.3cm) high. 7.6 oz. (215g) wt. Mossberg fits models 500/590. 6-round ony. 6-3⁄8" (16.2cm) long x 1-3⁄8" (3.5cm) high. 5.2 oz. (147g) wt.Benelli Sidemount fits M1/M2/M3. Benelli 6-Round Sidemount – 6” (15.2cm) long x 2½” high. 6.3 oz. (179g) wt. Benelli Picatinny available for M2 (requires drilling tapping receiver to fit M1), M4/M1014, and Supernova. Benelli M2 6-Round Picatinny – 6” long x 2 (5.1cm)” high. 7.4 oz. (210g) wt. Benelli M4/M1014 6-Round Picatinny – 6” long x 2” (5.1cm) high. 7.5 oz. (213g) wt.
* Requires use of shorter forend on Rem 870.
+ Requires minor forend alterations to fit Rem 1100/11-87.
** Requires drilling/tapping receiver to fit M1.
¡Prepárate para llevar más munición al alcance de tu mano!
Los operadores profesionales que no quieren sacrificar calidad, rendimiento y durabilidad encontrarán los portamuniciones de polímero SureShell® de Mesa Tactical como una alternativa especialmente atractiva y económica frente a los porta cartuchos de plástico de bajo costo ofrecidos por la competencia.
Descripción del Producto
Los portamuniciones SureShell® están fabricados con un polímero duradero y resistente a impactos. Este sistema de portamuniciones, disponible en una configuración de seis cartuchos, cuenta con soportes para cartuchos moldeados por inyección a partir de polímero relleno de vidrio, asegurados al receptor mediante una placa trasera de aluminio liviana con insertos roscados de latón. El portamuniciones de polímero SureShell también incluye un innovador sistema de fricción de doble goma que mantiene los cartuchos en su lugar de manera confiable.
Algunos portamuniciones SureShell incluyen juntas de goma cortadas a medida con adhesivo de alta temperatura para proteger el acabado de la escopeta anfitriona. El sistema de montaje SureShell para escopetas Remington 870, 1100 y 11-87 utiliza una combinación de sujetadores de acero roscados en un pasador de acero (en la parte trasera) y tornillos Chicago emparejados (en la parte delantera) para una sujeción más segura a la escopeta, sin el riesgo de pellizcar el receptor. La placa de montaje incluso cuenta con una ventana sobre la ubicación del número de serie de la escopeta, facilitando el inventario por parte de los armeros.
Especificaciones
- Fabricado por inyección a partir de polímero relleno de vidrio.
- Placa trasera de aluminio liviana.
- Acabado en negro mate.
- Solo para calibre 12.
- Todos los modelos incluyen hardware de montaje, junta de goma e instrucciones de instalación.
- Modelos solo para diestros.
- Compatible con modelos Remington 870/1100/11-87 (puede requerir modificación del arma).
Modelos Disponibles
- Rem 6-Round Sidemount: 6¼” (15.8cm) de largo x 1½” de alto. Peso: 5.4 oz. (152g).
- Rem 8-Round Sidemount: 7¾” (19.7cm) de largo x 1½” de alto. Peso: 7 oz. (200g).
- Remington Picatinny: 7” (15.8cm) de largo x 2½” (6.3cm) de alto. Peso: 7.6 oz. (215g).
- Mossberg: 6 cartuchos solamente. 6-3/8" (16.2cm) de largo x 1-3/8" (3.5cm) de alto. Peso: 5.2 oz. (147g).
- Benelli Sidemount: Compatible con M1/M2/M3. Benelli 6-Round Sidemount: 6” (15.2cm) de largo x 2½” de alto. Peso: 6.3 oz. (179g).
- Benelli Picatinny: Disponible para M2 (requiere perforar y roscar el receptor para adaptarse a M1), M4/M1014 y Supernova. Benelli M2 6-Round Picatinny: 6” de largo x 2” (5.1cm) de alto. Peso: 7.4 oz. (210g).
- Benelli M4/M1014 6-Round Picatinny: 6” de largo x 2” (5.1cm) de alto. Peso: 7.5 oz. (213g).
* Requiere el uso de un forend más corto en el Rem 870.
+ Requiere modificaciones menores en el forend para adaptarse al Rem 1100/11-87.
** Requiere perforar/roscar el receptor para adaptarse al M1.