Carry more ammunition “at the ready”: Professional operators who are unwilling to sacrifice quality, performance, and durability, will find Mesa Tactical’s polymer shotshell carriers to be an especially attractive and economical alternative to the low-cost consumer grade plastic shell holders offered by competitors. SureShell® Polymer Shotshell Carriers are made from durable, impact resistant polymer. This shotshell carrier system, available in a six shell configuration, features shell holders injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. The SureShell Polymer Carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish. The Sureshell receiver mounting system for Remington 870, 1100 and 11-87 shotguns uses a combination of steel fasteners threaded into a steel pin (at the rear) and paired Chicago screws (up front) for more secure attachment to the shotgun without the risk of pinching the receiver. The mounting plate even features a window over the shotgun serial number location, to make it easier for armorers to inventory their weapons. Models are available with and without integral Picatinny rails for mounting optics. Like all SureShell carriers, the new polymer SureShell shotshell carriers work well in all climates and environments, and are designed to withstand the daily use and abuse to which arsenal weapons are commonly subjected. This system securely holds shells in place until needed at which time they are readily accessible and easily removed for rapid reloading.
SPECS: Injection molded from glass filled polymer, lightweight aluminum backplate, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Right Hand models only. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 6-Round Sidemount – 6¼” (15.8cm) long x 1½” high. 5.4 oz. (152g) wt. Rem 8-Round Sidemount – 7¾” (19.7) long x 1½” high. 7 oz. (200g) wt. Remington Picatinny fits models 870/1100/11-87 (may require modification to gun). 7” (15.8cm) long x 2½” (6.3cm) high. 7.6 oz. (215g) wt. Mossberg fits models 500/590. 6-round ony. 6-3⁄8" (16.2cm) long x 1-3⁄8" (3.5cm) high. 5.2 oz. (147g) wt.Benelli Sidemount fits M1/M2/M3. Benelli 6-Round Sidemount – 6” (15.2cm) long x 2½” high. 6.3 oz. (179g) wt. Benelli Picatinny available for M2 (requires drilling tapping receiver to fit M1), M4/M1014, and Supernova. Benelli M2 6-Round Picatinny – 6” long x 2 (5.1cm)” high. 7.4 oz. (210g) wt. Benelli M4/M1014 6-Round Picatinny – 6” long x 2” (5.1cm) high. 7.5 oz. (213g) wt.
* Requires use of shorter forend on Rem 870. + Requires minor forend alterations to fit Rem 1100/11-87. ** Requires drilling/tapping receiver to fit M1.
Más...
84.9169.96EUR
N.º de producto: 100019757 MESA TACTICAL PRODUCTS SURESHELL POLYMER CARRIER & SADDLE REMINGTON 870 12 GA 6RD Ref Fabricante: 94830878405004356
169.9EUR0169,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Caracteristicas:Calibre: 12 GaugeCapacidad: 6-RoundEstilo: Side Mount
Carry more ammunition “at the ready”: Professional operators who are unwilling to sacrifice quality, performance, and durability, will find Mesa Tactical’s polymer shotshell carriers to be an especially attractive and economical alternative to the low-cost consumer grade plastic shell holders offered by competitors. SureShell® Polymer Shotshell Carriers are made from durable, impact resistant polymer. This shotshell carrier system, available in a six shell configuration, features shell holders injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. The SureShell Polymer Carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish. The Sureshell receiver mounting system for Remington 870, 1100 and 11-87 shotguns uses a combination of steel fasteners threaded into a steel pin (at the rear) and paired Chicago screws (up front) for more secure attachment to the shotgun without the risk of pinching the receiver. The mounting plate even features a window over the shotgun serial number location, to make it easier for armorers to inventory their weapons. Models are available with and without integral Picatinny rails for mounting optics. Like all SureShell carriers, the new polymer SureShell shotshell carriers work well in all climates and environments, and are designed to withstand the daily use and abuse to which arsenal weapons are commonly subjected. This system securely holds shells in place until needed at which time they are readily accessible and easily removed for rapid reloading.
SPECS: Injection molded from glass filled polymer, lightweight aluminum backplate, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Right Hand models only. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 6-Round Sidemount – 6¼” (15.8cm) long x 1½” high. 5.4 oz. (152g) wt. Rem 8-Round Sidemount – 7¾” (19.7) long x 1½” high. 7 oz. (200g) wt. Remington Picatinny fits models 870/1100/11-87 (may require modification to gun). 7” (15.8cm) long x 2½” (6.3cm) high. 7.6 oz. (215g) wt. Mossberg fits models 500/590. 6-round ony. 6-3⁄8" (16.2cm) long x 1-3⁄8" (3.5cm) high. 5.2 oz. (147g) wt.Benelli Sidemount fits M1/M2/M3. Benelli 6-Round Sidemount – 6” (15.2cm) long x 2½” high. 6.3 oz. (179g) wt. Benelli Picatinny available for M2 (requires drilling tapping receiver to fit M1), M4/M1014, and Supernova. Benelli M2 6-Round Picatinny – 6” long x 2 (5.1cm)” high. 7.4 oz. (210g) wt. Benelli M4/M1014 6-Round Picatinny – 6” long x 2” (5.1cm) high. 7.5 oz. (213g) wt.
* Requires use of shorter forend on Rem 870. + Requires minor forend alterations to fit Rem 1100/11-87. ** Requires drilling/tapping receiver to fit M1.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.