SWITCHBACK 2.0 LARGE FLASHLIGHT RING WITH POCKET CLIP The SwitchBack® 2.0 adds a multi-function finger ring and robust pocket clip to your tactical flashlight. It mounts securely between the light’s tailcap and body, providing a repeatable grip index during deployment from pocket or pouch, and enhances ergonomics while shooting or searching. The SwitchBack® 2.0 is the next evolution in the innovative SwitchBack Flashlight Ring product line. It incorporates new features and refinements based on thousands of hours of use by our subject matter experts and customers. The SwitchBack mounts between the tailcap and body of your flashlight, making it secure regardless of impact, moisture, and heat/cold changes. FEATURES: SwitchBacks can be used with handguns or long guns. It allows the user to: Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring. Shoot using a natural two-handed grip (the SwitchBack Technique). Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries. Positively retain the light when drawing a firearm, reloading, and addressing a malfunction. The SwitchBack provides fast deployment and enhanced retention during many activities such as climbing, backpacking, car and home maintenance, and self-defense. New for SwitchBack 2.0: A finger ring that releases under heavy force/torque but can be reset. A stronger pocket clip that also works with MOLLE/PALS webbing. A pocket clip position that allows for slightly deeper carry than the SwitchBack® Large (original). A tubular portion that is cut lower to allow grip on both sides of the tail-cap during installation. A wider thumb rest with traction features. Small crush ribs on the SwitchBack 2.0’s lip that create a custom fit across a broader range of lights. An aluminum spacer that expands compatibility to Streamlight HL and HL-X flashlights and other manufacturers with similar designs. Installation For installation, first try installing the SwitchBack on your light without use of the O-ring or aluminum washer. Simply unscrew the tailcap, add the SwitchBack, and rescrew the tailcap back on. If the light does not activate upon use of the tailcap switch with the SwitchBack installed, try installing the aluminum washer as shown in the diagram below. Streamlight models tend to require the aluminum washer, but may not, depending on the tailcap features of the light. Elzetta and Surefire models do not usually require the aluminum washer, but users may find that addition of the rubber O-ring will help to stabilize the position of the SwitchBack
¡Mejora tu experiencia táctica con el SwitchBack 2.0!
El SwitchBack 2.0 es un anillo para linterna grande que incluye un clip para el bolsillo, diseñado para optimizar el uso de tu linterna táctica. Este innovador accesorio se monta de manera segura entre la tapa trasera y el cuerpo de la linterna, ofreciendo un índice de agarre repetible al sacarla de tu bolsillo o funda, además de mejorar la ergonomía al disparar o buscar.
Características del SwitchBack 2.0:
- Compatible con pistolas y rifles.
- Permite desplegar y posicionar la linterna de manera confiable desde bolsillos y fundas, utilizando el anillo de retención rígido pero liberable del SwitchBack.
- Facilita un agarre natural con ambas manos (la técnica SwitchBack).
- Soporta todas las técnicas tradicionales de baja luz como Neck Index, Modified FBI y Harries.
- Retiene la linterna de forma segura al sacar un arma, recargar y manejar fallos.
El SwitchBack ofrece un despliegue rápido y una retención mejorada durante diversas actividades como escalar, hacer senderismo, mantenimiento del hogar y defensa personal.
Novedades del SwitchBack 2.0:
- Anillo que se libera bajo fuerza/torque, pero se puede reiniciar.
- Clip para el bolsillo más fuerte que también funciona con tejido MOLLE/PALS.
- Posición del clip que permite un transporte ligeramente más profundo que el SwitchBack® Large (original).
- Porción tubular cortada más baja para permitir un agarre en ambos lados de la tapa trasera durante la instalación.
- Descanso para el pulgar más ancho con características de tracción.
- Pequeñas costillas de compresión en el labio del SwitchBack 2.0 que crean un ajuste personalizado en una gama más amplia de linternas.
- Espaciador de aluminio que amplía la compatibilidad a linternas Streamlight HL y HL-X y otros fabricantes con diseños similares.
Instalación:
Para la instalación, primero intenta colocar el SwitchBack en tu linterna sin usar el O-ring o la arandela de aluminio. Simplemente desenrosca la tapa trasera, añade el SwitchBack y vuelve a enroscar la tapa. Si la linterna no se activa al usar el interruptor de la tapa trasera con el SwitchBack instalado, intenta instalar la arandela de aluminio como se muestra en el diagrama. Los modelos Streamlight suelen requerir la arandela de aluminio, pero puede que no sea necesario, dependiendo de las características de la tapa trasera de la linterna. Los modelos Elzetta y Surefire generalmente no requieren la arandela de aluminio, pero los usuarios pueden encontrar que la adición del O-ring de goma ayudará a estabilizar la posición del SwitchBack.