SWITCHBACK 2.0 LARGE FLASHLIGHT RING WITH POCKET CLIP The SwitchBack® 2.0 adds a multi-function finger ring and robust pocket clip to your tactical flashlight. It mounts securely between the light’s tailcap and body, providing a repeatable grip index during deployment from pocket or pouch, and enhances ergonomics while shooting or searching. The SwitchBack® 2.0 is the next evolution in the innovative SwitchBack Flashlight Ring product line. It incorporates new features and refinements based on thousands of hours of use by our subject matter experts and customers. The SwitchBack mounts between the tailcap and body of your flashlight, making it secure regardless of impact, moisture, and heat/cold changes. FEATURES: SwitchBacks can be used with handguns or long guns. It allows the user to: Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring. Shoot using a natural two-handed grip (the SwitchBack Technique). Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries. Positively retain the light when drawing a firearm, reloading, and addressing a malfunction. The SwitchBack provides fast deployment and enhanced retention during many activities such as climbing, backpacking, car and home maintenance, and self-defense. New for SwitchBack 2.0: A finger ring that releases under heavy force/torque but can be reset. A stronger pocket clip that also works with MOLLE/PALS webbing. A pocket clip position that allows for slightly deeper carry than the SwitchBack® Large (original). A tubular portion that is cut lower to allow grip on both sides of the tail-cap during installation. A wider thumb rest with traction features. Small crush ribs on the SwitchBack 2.0’s lip that create a custom fit across a broader range of lights. An aluminum spacer that expands compatibility to Streamlight HL and HL-X flashlights and other manufacturers with similar designs. Installation For installation, first try installing the SwitchBack on your light without use of the O-ring or aluminum washer. Simply unscrew the tailcap, add the SwitchBack, and rescrew the tailcap back on. If the light does not activate upon use of the tailcap switch with the SwitchBack installed, try installing the aluminum washer as shown in the diagram below. Streamlight models tend to require the aluminum washer, but may not, depending on the tailcap features of the light. Elzetta and Surefire models do not usually require the aluminum washer, but users may find that addition of the rubber O-ring will help to stabilize the position of the SwitchBack
¡Mejora tu experiencia con la linterna táctica!
El SwitchBack 2.0 es un anillo grande para linterna con clip para bolsillo que añade un anillo multifuncional para los dedos y un robusto clip para bolsillo a tu linterna táctica. Se monta de forma segura entre la tapa trasera y el cuerpo de la linterna, proporcionando un índice de agarre repetible al desplegarla desde el bolsillo o la funda, y mejora la ergonomía mientras disparas o buscas.
Características del SwitchBack 2.0:
- Se puede usar con pistolas o rifles.
- Permite desplegar e indexar la linterna de manera confiable desde bolsillos y fundas, utilizando el anillo de retención rígido pero liberable del SwitchBack.
- Disparar utilizando un agarre natural de dos manos (la Técnica SwitchBack).
- Emplear todas las técnicas tradicionales de baja luminosidad como Neck Index, Modified FBI y Harries.
- Retener positivamente la linterna al sacar un arma, recargar y abordar una falla.
- Proporciona un despliegue rápido y una retención mejorada durante actividades como escalar, hacer senderismo, mantenimiento de coches y casas, y defensa personal.
Novedades del SwitchBack 2.0:
- Un anillo para los dedos que se libera bajo fuerza/torque fuerte pero que se puede reiniciar.
- Un clip para bolsillo más fuerte que también funciona con tejido MOLLE/PALS.
- Una posición de clip para bolsillo que permite un transporte ligeramente más profundo que el SwitchBack® Large (original).
- Una porción tubular que se corta más baja para permitir el agarre en ambos lados de la tapa trasera durante la instalación.
- Un reposapiés más ancho con características de tracción.
- Pequeñas costillas de compresión en el labio del SwitchBack 2.0 que crean un ajuste personalizado para una gama más amplia de linternas.
- Un espaciador de aluminio que expande la compatibilidad a linternas Streamlight HL y HL-X y otros fabricantes con diseños similares.
Instalación:
Para la instalación, primero intenta instalar el SwitchBack en tu linterna sin usar el O-ring o la arandela de aluminio. Simplemente desenrosca la tapa trasera, añade el SwitchBack y vuelve a enroscar la tapa trasera. Si la linterna no se activa al usar el interruptor de la tapa trasera con el SwitchBack instalado, intenta instalar la arandela de aluminio como se muestra en el diagrama a continuación. Los modelos Streamlight tienden a requerir la arandela de aluminio, pero puede que no, dependiendo de las características de la tapa trasera de la linterna. Los modelos Elzetta y Surefire generalmente no requieren la arandela de aluminio, pero los usuarios pueden encontrar que la adición del O-ring de goma ayudará a estabilizar la posición del SwitchBack.