SWITCHBACK DF FLASHLIGHT RING WITH POCKET CLIP The SwitchBack® DF adds a multi-function finger ring and robust pocket clip to SureFire’s Dual Fuel Series Flashlights. It mounts securely on the light’s tailcap, providing a repeatable grip index during deployment from pocket or pouch, and enhances ergonomics while shooting or searching. Featuring the same enhanced features as the SwitchBack® 2.0, the SwitchBack DF Flashlight Ring is the ergonomic upgrade your SureFire Dual Fuel tactical flashlight deserves! It features a larger opening to accept the Dual Fuel’s tailcap and includes an additional lock to ensure it stays in place during hard use. FEATURES: Like all our SwitchBacks, it can be used with handguns or long guns, allowing the user to: Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring. Shoot using a natural two-handed grip (the SwitchBack Technique). Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries. Positively retain the light when drawing a firearm, reloading, and addressing a malfunction. The SwitchBack DF Flashlight Ring also provides fast deployment and enhanced retention during many activities such as climbing, backpacking, car and home maintenance, and self-defense. A finger ring that releases under heavy force/torque, but can be reset. A strong pocket clip that also works with MOLLE/PALS webbing. A pocket clip position that allows for slightly deeper carry than the SwitchBack® Large (original). A tubular portion that is cut lower to allow grip on both sides of the tail-cap during installation. A wide thumb rest with traction features. Small crush ribs on the SwitchBack DF’s lip create a custom fit. Designed and manufactured in the USA. Installation For installation: Unlock the release ring and hold it below the latch on the tube of the SwitchBack; this will deflect the upper locking finger of the tube’s channel. Insert the tailcap until it’s seated at the bottom of the SwitchBack DF’s tube. Reattach the ring to the latch on the tube: This will capture the tailcap within the SwitchBack DF; you can press the top end of it against the tailcap to help seat it. No additional washers or O-rings are needed for installation, but the SureFire O-ring should stay on the light. Note: You do not need to remove the tailcap from the SwitchBack during battery changes. Caution: When changing batteries, be sure to carefully align the tailcap and body of the flashlight and screw down the tailcap without dislodging the sealing O-ring on the body of the flashlight.
Mejora tu experiencia de tiro con el SwitchBack DF.
El SwitchBack DF Flashlight Ring con clip para bolsillo añade un anillo multifuncional para el dedo y un robusto clip para bolsillo a las linternas de la serie Dual Fuel de SureFire. Se monta de manera segura en la tapa trasera de la linterna, proporcionando un índice de agarre repetible durante el despliegue desde el bolsillo o la funda, y mejora la ergonomía al disparar o buscar.
Características destacadas:
- Compatible con pistolas y rifles, permitiendo al usuario desplegar e indexar una linterna desde ambos bolsillos y fundas, utilizando el anillo de retención rígido pero liberable del SwitchBack.
- Dispara utilizando un agarre natural con dos manos (la técnica SwitchBack).
- Emplea todas las técnicas tradicionales de baja luminosidad como Neck Index, Modified FBI y Harries.
- Retiene positivamente la linterna al desenfundar un arma, recargar y abordar una falla.
- Despliegue rápido y retención mejorada durante actividades como escalada, senderismo, mantenimiento de coches y casas, y defensa personal.
- Anillo que se libera bajo fuerza/torque intenso, pero se puede restablecer.
- Clip para bolsillo fuerte que también funciona con webbing MOLLE/PALS.
- Posición del clip para bolsillo que permite un transporte ligeramente más profundo que el SwitchBack® Large (original).
- Porción tubular cortada más baja para permitir el agarre en ambos lados de la tapa trasera durante la instalación.
- Amplio reposapiés con características de tracción.
- Pequeñas costillas de compresión en el labio del SwitchBack DF crean un ajuste personalizado.
- Diseñado y fabricado en EE. UU.
Instrucciones de instalación:
Para la instalación: Desbloquea el anillo de liberación y sostenlo debajo del pestillo en el tubo del SwitchBack; esto desviará el dedo de bloqueo superior del canal del tubo. Inserta la tapa trasera hasta que esté asentada en el fondo del tubo del SwitchBack DF. Vuelve a colocar el anillo en el pestillo del tubo: esto capturará la tapa trasera dentro del SwitchBack DF; puedes presionar el extremo superior contra la tapa trasera para ayudar a asentarla. No se necesitan arandelas adicionales ni O-rings para la instalación, pero el O-ring de SureFire debe permanecer en la linterna.
Nota: No necesitas quitar la tapa trasera del SwitchBack durante los cambios de batería.
Precaución: Al cambiar las baterías, asegúrate de alinear cuidadosamente la tapa trasera y el cuerpo de la linterna y atornilla la tapa trasera sin desplazar el O-ring de sellado en el cuerpo de la linterna.