SWITCHBACK DF FLASHLIGHT RING WITH POCKET CLIP The SwitchBack® DF adds a multi-function finger ring and robust pocket clip to SureFire’s Dual Fuel Series Flashlights. It mounts securely on the light’s tailcap, providing a repeatable grip index during deployment from pocket or pouch, and enhances ergonomics while shooting or searching. Featuring the same enhanced features as the SwitchBack® 2.0, the SwitchBack DF Flashlight Ring is the ergonomic upgrade your SureFire Dual Fuel tactical flashlight deserves! It features a larger opening to accept the Dual Fuel’s tailcap and includes an additional lock to ensure it stays in place during hard use. FEATURES: Like all our SwitchBacks, it can be used with handguns or long guns, allowing the user to: Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring. Shoot using a natural two-handed grip (the SwitchBack Technique). Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries. Positively retain the light when drawing a firearm, reloading, and addressing a malfunction. The SwitchBack DF Flashlight Ring also provides fast deployment and enhanced retention during many activities such as climbing, backpacking, car and home maintenance, and self-defense. A finger ring that releases under heavy force/torque, but can be reset. A strong pocket clip that also works with MOLLE/PALS webbing. A pocket clip position that allows for slightly deeper carry than the SwitchBack® Large (original). A tubular portion that is cut lower to allow grip on both sides of the tail-cap during installation. A wide thumb rest with traction features. Small crush ribs on the SwitchBack DF’s lip create a custom fit. Designed and manufactured in the USA. Installation For installation: Unlock the release ring and hold it below the latch on the tube of the SwitchBack; this will deflect the upper locking finger of the tube’s channel. Insert the tailcap until it’s seated at the bottom of the SwitchBack DF’s tube. Reattach the ring to the latch on the tube: This will capture the tailcap within the SwitchBack DF; you can press the top end of it against the tailcap to help seat it. No additional washers or O-rings are needed for installation, but the SureFire O-ring should stay on the light. Note: You do not need to remove the tailcap from the SwitchBack during battery changes. Caution: When changing batteries, be sure to carefully align the tailcap and body of the flashlight and screw down the tailcap without dislodging the sealing O-ring on the body of the flashlight.
¡Mejora tu experiencia táctica con el SwitchBack DF!
El SwitchBack DF Flashlight Ring con clip para bolsillo es el accesorio perfecto para tu linterna SureFire de la serie Dual Fuel. Este innovador anillo multifuncional se monta de manera segura en la tapa trasera de la linterna, proporcionando un índice de agarre repetible durante su uso desde el bolsillo o la funda, y mejorando la ergonomía al disparar o buscar.
Características destacadas:
- Compatible con pistolas y rifles, permitiendo al usuario desplegar y posicionar la linterna de manera confiable desde bolsillos y fundas.
- Utiliza un agarre natural con ambas manos (la técnica SwitchBack).
- Emplea técnicas tradicionales de baja luminosidad como Neck Index, Modified FBI y Harries.
- Retiene positivamente la linterna al desenfundar un arma, recargar y solucionar fallos.
- Ofrece un despliegue rápido y una retención mejorada durante actividades como escalar, hacer senderismo, mantenimiento de coches y casas, y defensa personal.
- Anillo de dedo que se libera bajo fuerza/torque elevado, pero que se puede restablecer.
- Clip para bolsillo resistente que también funciona con tejido MOLLE/PALS.
- Posición del clip que permite un transporte ligeramente más profundo que el SwitchBack® Large (original).
- Parte tubular cortada más baja para permitir un agarre en ambos lados de la tapa trasera durante la instalación.
- Amplio reposapiés con características de tracción.
- Pequeñas costillas de compresión en el labio del SwitchBack DF crean un ajuste personalizado.
- Diseñado y fabricado en EE. UU.
Instalación:
Para la instalación: Desbloquea el anillo de liberación y manténlo por debajo del pestillo en el tubo del SwitchBack; esto desviará el dedo de bloqueo superior del canal del tubo. Inserta la tapa trasera hasta que esté asentada en el fondo del tubo del SwitchBack DF. Vuelve a colocar el anillo en el pestillo del tubo: esto capturará la tapa trasera dentro del SwitchBack DF; puedes presionar el extremo superior contra la tapa trasera para ayudar a asentarla. No se necesitan arandelas adicionales ni O-rings para la instalación, pero el O-ring de SureFire debe permanecer en la linterna.
Nota: No necesitas quitar la tapa trasera del SwitchBack durante los cambios de batería.
Precaución: Al cambiar las baterías, asegúrate de alinear cuidadosamente la tapa trasera y el cuerpo de la linterna y atornillar la tapa trasera sin desalojar el O-ring de sellado en el cuerpo de la linterna.