Initial Setup: Place the riflescope into the mounting rings, tightening the clamping screws just enough so that the scope tube can still be rotated freely.
Securing the Tool: Position the ZFIX into one of the Picatinny rail slots and secure it to the firearm using the included rubber bands. Ensure that the ZFIX sits completely flat and flush inside the groove.
Alignment: Look through the eyepiece (ocular) and rotate the riflescope until the crosshairs perfectly align with the horizontal reference lines marked on the ZFIX.
Finalization: Once properly aligned, tighten the mounting ring screws according to the manufacturer's specifications.
Herramienta de alineación ZFIX para una configuración precisa de tu visor
El ZFIX Alignment Tool de ERATAC es esencial para asegurar que tu riflescope esté perfectamente alineado. Aquí te mostramos cómo utilizarlo:
Configuración inicial:
- Coloca el riflescope en los anillos de montaje, ajustando los tornillos de sujeción solo lo suficiente para que el tubo del visor pueda girar libremente.
Asegurando la herramienta:
- Posiciona el ZFIX en una de las ranuras del riel Picatinny y asegúralo al arma de fuego utilizando las bandas de goma incluidas.
- Asegúrate de que el ZFIX esté completamente plano y alineado dentro de la ranura.
Alineación:
- Mira a través del ocular y gira el riflescope hasta que las cruces se alineen perfectamente con las líneas de referencia horizontales marcadas en el ZFIX.
Finalización:
- Una vez que esté correctamente alineado, aprieta los tornillos de los anillos de montaje según las especificaciones del fabricante.
Con el ZFIX, tu configuración de visor será más fácil y precisa, mejorando así tu experiencia de tiro.