Atributos
- Hacer: -
- Modelo: -
- Peso de entrega: 0,091kg
- Altura de envío: 8mm
- Ancho de envío: 79mm
- Longitud de envío: 157mm
- UPC: 050806008304
N.º de producto: 080097100
N.º fabr.: BOLTBODYONLY
050806008304 La herramienta con resorte proporciona una presión constante y recta hacia atrás para mantener las lengüetas del cerrojo en escuadra contra el receptor mientras se lapea con abrasivo de carburo de silicio de 600 a 800 granos. Ofrece mejores resultados que la simple presión con el dedo. Las fundas roscadas intercambiables se adaptan a las acciones populares listadas a continuación.Plazo de entrega de aproximadamente 14-21 días.
La herramienta BOLT LAPPING TOOL de BROWNELLS es perfecta para mantener la presión constante y recta en los cerrojos mientras trabajas con abrasivos de 600 a 800 grit. Esto asegura que los lugs del cerrojo se mantengan cuadrados contra el receptor, logrando un mejor acabado que simplemente usar la presión de los dedos.
Esta herramienta de resorte proporciona resultados superiores y su diseño intercambiable permite adaptarse a las acciones más populares. A continuación, se detallan las especificaciones:
El juego de M14/M1A incluye un émbolo de gran diámetro y un mango de lapeado especial necesario para estos modelos. Además, hay diferentes mangas intercambiables:
El One Gun Set incluye el cuerpo de la herramienta para cerrojos, el émbolo y la manga del tamaño correcto para el modelo listado. El M14/M1A One Gun Set contiene el cuerpo de la herramienta para cerrojos, un émbolo de gran diámetro, la manga del tamaño correcto y una manga especial, así como una herramienta de lapeado de cerrojo única para M14/M1A/M1 Garand.
Este kit contiene todas las herramientas necesarias para lapeado de todos los modelos listados en la tabla. *Precio especial, consulta abajo.
Very nice fit of parts. 31/08/2015
I bought this one-gun kit after trying to use the plunger body from the M14/M1/M1A kit. It did not fit a sleeve I had bought for the Large Ring Mauser. After receiving this kit with it's plunger body I then began trying all the parts one at a time.
Both plunger bodies are 0.5620" and the sleeves are 0.5625 except the M14, it was 0.563. There were little burrs on the plunger body of the M14 kit that made me think it would not fit the different sleeves. All fit well after a little lapping.
I plan on using the bolt lug lapping tool for several rifles I am building. After using the tool I believe I can use it to square the bolt face on a Mauser Large Ring VZ-24. After reaming the sleeve from existing 9/16" to a 5/8" I will press fit a drill bushing that is 5/8 x 3/8 and use the Mason Reamer Burr which has a 3/8" shaft. The Burr has been ground to 0.3740 to 0.3745. It has a buttery slip fit in the Drill Bushing.
Mauser threads are at a 55 deg pitch and not easy to find. Brownells sells the sleeve with the right threads for the '98 and the face truing Burrs. All you need is the drill bushing, the undersized drill, and the reamer to make the altered sleeve to be able to Lapp the lugs with the original unaltered sleeve, and true the face of your bolt with your altered sleeve. After, of course, you check that the receivers threads are true to the action. This can be checked with a mandrel which Brownells has too. This can be done for any rifle that Brownells has a sleeve for. Happy Gunsmithing, JL.
Hemos encontrado un error al cargar este contenido. Actualice la página para continuar. Si el problema persiste, póngase en contacto con nuestro servicio de atención al cliente.