Atributos
- Modelo:
Universal Rifles
- Tipo de arma:
Mauser
- Peso de entrega: 0,113kg
- Altura de envío: 18mm
- Ancho de envío: 74mm
- Longitud de envío: 226mm
- UPC: 050806008359
N.º de producto: 080097198
050806008359 La herramienta con resorte proporciona una presión constante y recta hacia atrás para mantener las lengüetas del cerrojo en escuadra contra el receptor mientras se lapea con abrasivo de carburo de silicio de 600 a 800 granos. Ofrece mejores resultados que la simple presión con el dedo. Las fundas roscadas intercambiables se adaptan a las acciones populares listadas a continuación.Plazo de entrega de aproximadamente 14-21 días.
El BOLT LAPPING TOOLS, 2-PIECE BOLT LAPPING KIT FOR MAUSER LARGE de BROWNELLS es la solución perfecta para asegurar un acoplamiento preciso de los alojamientos de los lóbulos de bloqueo.
Esta herramienta de lapeado con resorte proporciona una presión constante y recta hacia atrás, manteniendo los lóbulos del cerrojo en escuadra contra el receptor mientras realizas el lapeado con abrasivo de carburo de silicio de grano 600 a 800. Ofrece mejores resultados que la simple presión con el pulgar.
Los manguitos roscados intercambiables se adaptan a las acciones populares que se enumeran a continuación.
El manguito del M14/M1A Set incluye un émbolo de gran diámetro y un mango de lapeado especial requerido para estos modelos. El manguito Mauser Large se adapta a las acciones de Mauser de anillo grande, mientras que el Mauser Small se adapta a las acciones de Mauser de anillo pequeño.
El manguito Savage Small se adapta a las acciones Savage en todos los calibres, excepto Rem Ultra Mag (RUM), Rem SA Ultra Mag (RSUM) y Win Short Mag (WSM). El manguito Savage Large se adapta a las acciones Savage únicamente en calibres RUM, RSUM y WSM.
Un Gun Set contiene el cuerpo de la herramienta de cerrojo, el émbolo y el manguito de tamaño correcto para el modelo listado. El M14/M1A One Gun Set incluye el cuerpo de la herramienta de cerrojo, un émbolo de gran diámetro, el manguito del tamaño correcto y una herramienta de lapeado de cerrojo especial única para M14/M1A/M1 Garand.
El kit contiene todas las herramientas necesarias para lapeado de todos los modelos listados en la tabla. *Precio especial, consulta a continuación.
Universal Rifles
Mauser
Very nice fit of parts. 31/08/2015
I bought this one-gun kit after trying to use the plunger body from the M14/M1/M1A kit. It did not fit a sleeve I had bought for the Large Ring Mauser. After receiving this kit with it's plunger body I then began trying all the parts one at a time.
Both plunger bodies are 0.5620" and the sleeves are 0.5625 except the M14, it was 0.563. There were little burrs on the plunger body of the M14 kit that made me think it would not fit the different sleeves. All fit well after a little lapping.
I plan on using the bolt lug lapping tool for several rifles I am building. After using the tool I believe I can use it to square the bolt face on a Mauser Large Ring VZ-24. After reaming the sleeve from existing 9/16" to a 5/8" I will press fit a drill bushing that is 5/8 x 3/8 and use the Mason Reamer Burr which has a 3/8" shaft. The Burr has been ground to 0.3740 to 0.3745. It has a buttery slip fit in the Drill Bushing.
Mauser threads are at a 55 deg pitch and not easy to find. Brownells sells the sleeve with the right threads for the '98 and the face truing Burrs. All you need is the drill bushing, the undersized drill, and the reamer to make the altered sleeve to be able to Lapp the lugs with the original unaltered sleeve, and true the face of your bolt with your altered sleeve. After, of course, you check that the receivers threads are true to the action. This can be checked with a mandrel which Brownells has too. This can be done for any rifle that Brownells has a sleeve for. Happy Gunsmithing, JL.
Hemos encontrado un error al cargar este contenido. Actualice la página para continuar. Si el problema persiste, póngase en contacto con nuestro servicio de atención al cliente.