Atributos
- Modelo:
Universal Rifles
- Tipo de arma:
Savage Arms
- Peso de entrega: 0,159kg
- Altura de envío: 13mm
- Ancho de envío: 71mm
- Longitud de envío: 127mm
- UPC: 050806008243
N.º de producto: 080097004
050806008243 La herramienta con resorte proporciona una presión constante y recta hacia atrás para mantener las lengüetas del cerrojo en escuadra contra el receptor mientras se lapea con abrasivo de carburo de silicio de 600 a 800 granos. Ofrece mejores resultados que la simple presión con el dedo. Las fundas roscadas intercambiables se adaptan a las acciones populares listadas a continuación.Plazo de entrega de aproximadamente 14-21 días.
El BOLT LAPPING TOOLS, 2-PIECE BOLT LAPPING KIT FOR SAVAGE SMALL de BROWNELLS es la solución ideal para asegurar un ajuste perfecto de los pernos en tus acciones de rifle.
Esta herramienta de resorte proporciona una presión constante y recta hacia atrás, manteniendo los pernos cuadrados contra el receptor mientras se lija con abrasivo de carburo de silicio de grano 600 a 800. Ofrece mejores resultados que simplemente usar la presión de los dedos. Las fundas roscadas intercambiables se adaptan a las acciones populares que se enumeran a continuación.
El conjunto de M14/M1A incluye un émbolo de gran diámetro y un mango de lijado especial requerido para estos modelos. La funda Mauser Grande se adapta a las acciones Mauser de anillo grande, mientras que la funda Mauser Pequeña se adapta a las acciones Mauser de anillo pequeño. La funda Savage Pequeña se adapta a las acciones Savage en todos los calibres, excepto en Rem Ultra Mag (RUM), Rem SA Ultra Mag (RSUM) y Win Short Mag (WSM). La funda Savage Grande solo se adapta a las acciones Savage en calibres RUM, RSUM y WSM.
Un conjunto de una pistola contiene el cuerpo de la herramienta de perno, el émbolo y la funda del tamaño correcto para el modelo listado. El conjunto de una pistola M14/M1A incluye el cuerpo de la herramienta de perno, un émbolo de gran diámetro, la funda del tamaño correcto y una funda especial, además de una herramienta de lijado de perno única para M14/M1A/M1 Garand.
Este kit contiene todas las herramientas necesarias para lijar todos los modelos listados en la tabla. *Precio especial, consulta abajo.
Universal Rifles
Savage Arms
Very nice fit of parts. 31/08/2015
I bought this one-gun kit after trying to use the plunger body from the M14/M1/M1A kit. It did not fit a sleeve I had bought for the Large Ring Mauser. After receiving this kit with it's plunger body I then began trying all the parts one at a time.
Both plunger bodies are 0.5620" and the sleeves are 0.5625 except the M14, it was 0.563. There were little burrs on the plunger body of the M14 kit that made me think it would not fit the different sleeves. All fit well after a little lapping.
I plan on using the bolt lug lapping tool for several rifles I am building. After using the tool I believe I can use it to square the bolt face on a Mauser Large Ring VZ-24. After reaming the sleeve from existing 9/16" to a 5/8" I will press fit a drill bushing that is 5/8 x 3/8 and use the Mason Reamer Burr which has a 3/8" shaft. The Burr has been ground to 0.3740 to 0.3745. It has a buttery slip fit in the Drill Bushing.
Mauser threads are at a 55 deg pitch and not easy to find. Brownells sells the sleeve with the right threads for the '98 and the face truing Burrs. All you need is the drill bushing, the undersized drill, and the reamer to make the altered sleeve to be able to Lapp the lugs with the original unaltered sleeve, and true the face of your bolt with your altered sleeve. After, of course, you check that the receivers threads are true to the action. This can be checked with a mandrel which Brownells has too. This can be done for any rifle that Brownells has a sleeve for. Happy Gunsmithing, JL.
Hemos encontrado un error al cargar este contenido. Actualice la página para continuar. Si el problema persiste, póngase en contacto con nuestro servicio de atención al cliente.